Glass canopy awning Wiper Milo 900 x 1400 mm

Installation set:

• Supporting legs
• Acrylic plate
• Gutter
• Wall profile
• Screws and dowels for self-assembly of the roof

Please verify what type of wall you are dealing with before installing the canopy or side element. If necessary, you may need to use other screws and anchors (e.g. drywall anchors or similar) than those included in the enclosed installation kit.

Stainless steel:

All stainless steel components are made of V2A (1.4301). The surface is finely sanded (Korn 240). Under certain conditions 'rust-proof stainless steel' can rust despite the rust-proof specification if the surface is exposed to corrosive forces by:

• Extremely high air humidity with salinity in seaside environments
• Especially aggressive air pollution in major industrial regions or in the vicinity of very busy streets (acid rain)
• Contact with chlorinated water (swimming pools)
• Use of tools or devices previously employes for the proces sing of steel
• Contact with construction chemicals
• Splashing water containing de-icing salt and fine-grained cementmaterial carried (for instance through rain water) from exposed conrete grouts on the facade onto the surface of the construction element may equally become harmful

Primary Cleaning:

Primary cleaning is required directly after assembly. Iron particles on tools, gantries and means of transport need to be removed immediately in order to prevent eventual deposits of grinding or drilling dust, chippings and splashing water onto the stainless steel due to possible work with metal in the immediately vicinity. Those impurities can locally penetrate the exposed stainless steel and cause point-shaped corrosion.

Care/Prevention:

• We recommend our LIGHTLINE Shine care product (stainless steel/aluminium care, article no. 170993)
• The product may also be cleaned by wiping it with a mild dishwashing detergend and cleanser; commercial stainless steel cleaners may also be used
• Depending on the degree of soiling regular cleaning is vital
• Stainless steel surfaces, like glass surface, should be cleaned at regular intervals (in heavily polluted surroundings approx. every 3-6 months, in less pollutes surroundings approx. every 6-12 months)
• Periodically check to see that all attachment hardware is tight and secure
• As necessary, clear the rain gutter channels of dirt and debris to ensure proper water flow
• Do not use cleaners containing solvents or abrasive cleaners on acrylic glass and metal. Please only use a mild soap solution with a soft, non-abrasive cloth