Wet Room Shower Trays with special dimensions

Looking for non-standard sizes? No problem! Upon request, we can produce shower elements with special dimensions for you. If you are interested in a non-binding quotation, please send us an e-mail with the following details:

  • Desired dimensions: width x length [mm]
  • Shower element thickness: 20 / 28 / 35 [mm] - up to 60 [mm].
  • Design grids: Ponente (full coverage), Pure (tilable), Sirocco, Mistral, Zonda
  • If required, offset drain: left or right (minimum distance: 75 mm) - multiple drains also possible
  • Siphon: Drop 50, Drop 35, Vertical, McAlpine HC26
  • Slope: single or four-sided
  • Further information can be found on our product pages.

In addition, the following variants are possible:

  • Other shower channel model: Elite or Invisible | Standard: Premium
  • Offset outlet position (left/right, minimum distance 75 mm) | Standard: central
  • Surface finish: Polished or matt | Standard: brushed
  • Gutter positioning: parallel to length | Standard: in width
  • Optional: waterproofing kit, electric under floor heating, tile backer board, membrane roll
  • Stainless steel Grade 316 | Standard: Grade 304

Note: The shower channel must always be 300 mm shorter than the side where it is installed. Example: for an 800 x 1200 mm shower tray, the integrated channel is 500 mm long, since it is installed parallel to the width side (800 mm) as standard. On the longitudinal side, the shower channel would be 900 mm long.

Customized products require a production time of about 10 working days.

 Td Tray 1 - 100
 Td Tray 2 - 100
 Td Tray 3 - 100
 Td Tray 4 - 100
 Td Tray 5 - 100
 Td Tray 6 - 100
 Td Tray 7 - 100
 Td Tray 8 - 100
 Td Tray 9 - 100
Process4
Process3
Process2
Process

Linear drains with special dimensions

Looking for shower channels longer than 1200 mm? No problem! Upon request, we can produce special solutions of up to 2 metres in one piece.

We also produce shower channels with  staggered outlet positions and multiple drains. If you are interested in a non-binding quotation, please send us an e-mail with the following data: 

  • Model: Premium / Premium Slim, Elite / Elite Slim, Invisible / Invisible Slim.
  • Shower channel length
  • Offset drain possible: left or right (minimum distance: 75 mm) - multiple drains possible
  • Design grids: Ponente (full cover), Pure (tilable), Sirocco, Mistral, Zonda, Tivano
  • Siphon: Drop 50, Drop 35, Snake, Vertical, McAlpine HC26
  • Further information can be found on the product pages.

The following variants are also possible

  • Raised flange on one, two or three edges, for wall flush drains
  • Surface: polished or matt | standard: brushed
  • Stainless steel Grade 316 | Standard: Grade 304
  • Optional: waterproofing kit, electric under floor heating, tile backer board, membrane roll

Production of customised products takes approx. 10 working days.

The linear drain in your bespoke tray can be a custom or standard length and can be integrated into the tray in your chosen position. Some restrictions will apply depending on the dimensions and thickness of your tray in relation to the length of your linear drain. Give us a call or send an email and we can discuss how best to maximise your bespoke trays efficiency.

 Td Drain 1 - 100
 Td Drain 2 - 100
 Td Drain 3 - 100
 Td Drain 4 - 100
 Td Drain 5 - 100
 Td Drain 6 - 100
 Td Drain 7 - 100
 Td Drain 8 - 100
 Td Drain 9 - 100
 Td Drain 10 - 100

Use our custom order configurator and order a bespoke product perfect for your bathroom.

Product added to wishlist
×

We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies. For more information, please visit our Privacy Policy.

Close Customise Accept All