Shower drain Wiper 600 mm Wall Upstand Pure

is a special stainless steel shower floor drain. Water channel is surrounded by steel flange with one side bended vertically. Upstand flange helps with installation directly against the wall. It helps with proper waterproofing and maintaining right distance between tile surface and drain grate. It comes in different lengths which starts at 500 mm and goes all the way till 1200 mm every 100 mm. Although custom size is possible. It is made of 304 stainless steel which offers good corrosion resistance to both chemical and atmospheric exposures, with a high resistance to oxidation. Flange surrounding the channel is 30 mm wide which in combination with sealing membrane (included) ensures good watertightness.

Wall Upstand drain channel is 84 mm wide and it comes with included Pure tile able grate, which is 12 mm deep and 60 mm wide, grate is 594 mm long and total drain length with insulation flange is 660 mm. Slot drain should be filled with tiles, so after installation is completed only visible part of the drain should be the gap between channel and grating which water flows through. Sealing membrane is a blue non-woven fabric which bonds well with glue and is resistant to cracking.  

We also include 65 mm high McAlpine siphon trap with 95° Multifit connector. It features capacity of 26 l /min, 20 mm high water seal and Easy Access cleaning from above after lifting up the drain grating.