Linear drain Sieme 1000 mm Stone

The SIEME linear drains are a series of elegant and durable, high-quality drainage systems. They are finished with an elegant frame and stainless steel grate with a width of 70 mm. The drains come in length of 1000 mm. The product can be customized to match individual needs and tastes of the customers.

The Stone drain is a very convenient and elegant solution. The grate is filled with tiles, making it fit neatly into any bathroom interior. The drain is also equipped with a stainless steel flange, useful for installation in the floor with an insulating layer. The set also includes adjustable legs and an insulating cuff.

More details

New

£ 166.24

Tax included

  • Not include
  • 3 m²
  • 6 m²
Waterproofing kit is used to seal shower tray as well as connections between walls and floor. It is recommended for concrete and mandatory for timber flooring. Each kit contains: 4kg tanking liquid, 1l primer, 10m sealing tape, 2 corners, 2 pipe collars. One kit covers 3 m² with 2 coats. If you buy it as addition to any drain or wet room kit You save £40 if you buy kit that covers 3 m² or £80 if buy one which covers 6 m².

Save for later

Question will be displayed after moderation.
Send to a friend

Product information will be sent to given address.

* Required fields

Cancel

Channel length1000 mm
Grate styleStone (slot)
Channel height30 mm
Total height100 mm
Channel width70 mm
Total width109 mm
Material304 S 15 grade stainless steel
AdditionalsTanking kit
Drain surfacemirror · brush · matt
SiphonPlastic (PCV)
Steel collarIntegrated
CleaningFrom above (Easy clean system)
ModelSieme
Set consistsLinear drain body · stainless steel collar · sealing membrane · drain grating · Adjustable legs · siphon trap
  • Length (X): 1000 [mm]
  • Height of channel (C): 30 [mm]
  • Height to the centre of waste pipe (G): 65 [mm] (can be adjusted)
  • Total height (H): 100 [mm]
  • Height to the top from collar (T): 15 [mm]
  • Height of tiles (A): 14 [mm]
  • Width of tiles (D): 50 [mm]
  • Total width with collar (F): 109 [mm]
  • Width of channel (Y): 70 [mm]
  • Complete siphon, pipe diameter: 1.5" (british standard size),
  • Pipe height adjustable and rotatable at 360°,
  • Drain's cover included.
  • Tile channel depth (A): 12 [mm]
  • Tile channel width (D): 60 mm [mm]

The MATLASTIC mat is made of polyethylene film coated with a special non-woven fabric on both sides, so that it bonds with the glue layer better. Its installation is recommended in all areas that require sealing. The MATLASTIC mat is lightweight, flexible and resistant to decay, it ensures a uniform thickness of the sealing layer, it is resistant to cracking of the substrate, ensures the seal up of the entire surface, reduces installation time, allowing to lay the tiles immediately after gluing the mat.


Sealing membrane

Easygum Tanking Kit

A tanking kit is used to insulate the surface on which tiles will be laid, in areas exposed to moisture. It is recommended wherever a high degree of water resistance is required and in places with high humidity (eg, showers, bathrooms, toilets, laundries, kitchens, etc.). Waterproofing can be used on any type of substrate: the walls of the gypsum-carton boards (Rigips), plastered walls, walls of concrete blocks, wood-based materials, old ceramic tiles, old stone cladding, etc.

For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.

Tanking kit contains:

  • 4kg Tanking Liquid
  • 1l Primer
  • 10 Metres flexible Sealing Tape
  • 2 Flexible Pipe Collars
  • 2 Corners

Features:

  • Consumption to 1,2kg/m²
  • Solvent free
  • Drying time: 2h

Tanking liquid

The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.

Primer

The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.

Matlastic Mat

The Matlastic mat is made of polyethylene film coated with a special non-woven fabric on both sides, so that it bonds with the glue layer better. Its installation is recommended in all areas that require sealing. The MATLASTIC mat is lightweight, flexible and resistant to decay, it ensures a uniform thickness of the sealing layer, it is resistant to cracking of the substrate, ensures the seal up of the entire surface, reduces installation time, allowing to lay the tiles immediately after gluing the mat.

Application:

  • Indoor and outdoor
  • For walls and floors
  • for wet areas, such as: bathrooms, showers in apartments, hotels and buildings – utilities (moisture load class A01, A02, A1, A2),
  • For balconies, terraces
  • For use on moisture sensitive substrates, e.g.: gypsum plaster, gypsum planks, gypsum boards, gypsum-carton boards (Rigips), wooden particle boards,
  • For use on absorbent mineral substrates, e.g. on concrete, screed, stucco, cellular concrete, cement putty masses and leveling masses.

Propertites:

  • Water proof product,
  • Ductile product,
  • Scratch bridging product,
  • Product ready for use,
  • Fast readiness for further work,
  • They bind with all tile laying systems,
  • They seal corner joints in wet areas,
  • Forming flexible and durable connections.

Suitable for:

  • Wet rooms,
  • Showers,
  • Bathrooms,
  • Wooden floors,
  • Mosaic floors,
  • Concrete floors,
  • Screed floors,
  • Tiled floor surface,
  • Wheelchair use,

Caution. Please read the instructions carefully before installation.


  • The diagram shows various parts of the channel and their dimensions can be found on the More info tab.
  • We recommend that you do not remove the protective foil from the grating until the installation is complete
  • The instructions refer to the correct installation of the channel only and do not include information regarding insulation or other elements of the shower cabin such as sealing connections between the shower walls and floor as well as water proofing.
  • The channel should be installed together with the siphon trap and then the adjustable legs should be glued in the places shown.

Documents available below are available to everybody for free to download. They can be open in high quality on your computer and be printed for further use.

Sieme drains installationSiphon technical drawingLong term guarantee

30 Similar products