Linear drain Sieme 1100 mm Stone

It is possible to include a complete Underfloor Heating Kit to your order. All you need to do is to choose the required size. Additional package, with heating mat, appropriate thermostat, sensor and instructions will be dispatched together with the other goods.

To calculate required mat size you need to get square coverage of the floor and exclude any permanent / fixed fixtures from them. It is also recommended to buy slightly smaller mat than calculated size - you can shape it but cannot cut the cables, therefore too large mat could not be installed.

The SUNFLOOR Electric Heating Mat is a unique type of floor heating mat. The system has been designed to be used on an existing tiled floor or an existing finished floor, so that floor heating can still be installed there. The mat is approximately 4 mm thick and can be included in a layer of adhesive without any demolishing or grinding. The mat fits virtually underneath the surface. This decreases the heating time of the floor, that also makes this system suitable for rooms that are not permanently occupied including bathrooms, studies, playrooms, etc.

Underfloor heating mat set consists of all necessary parts for installation. One Thermostat is needed for every 23 m² of heating mat. It is included as optional, to allow ordering mat for custom areas, for example if you need 13 m² of mat total, you should buy 10 m² with one of the thermostats set as include and 3 m² with thermostat not included. In case you require less mat coverage than possible to buy from our product pictures, for example 14.5 m² you should always round low with your purchase and buy 14 m² as the mat is impossible to cut. It can be shaped but not shortened to size.

Details:
• 2.5 meter 3-core supply cable
• Fully encased in an aluminium earthed sheath
• Unique blind connection between the heating and the connection cable
• Chrome/Nickel resistance wire
• PTFE (Teflon) insulation
• PVC protective sheath
• 10 -11 watt per meter resistance wire, 230 Volt
• Cable diameter approximately 4 mm
• Complies with current NEN standards for installation in completely wet rooms

This stylish, colourful and refined digital clock thermostat has been specially designed for electric heating systems. The MAGNUM X-treme Control is supplied with every MAGNUM floor heating set (Mat,Cable and Foil types), including external floor sensor, a built-in air sensor and three different frames that suit most brands of switching equipment. The MAGNUM X-treme Control is simple and intuitive to operate using touch sensitive buttons under the display. The new chameleon function is simple to adapt to the colour of your interior. The stylish screensaver shows the time, temperature and current mode without touching the thermostat. The MAGNUM X-treme Control has a new help function that appears after 10 seconds in the menu with a complete description of the setting in question. The MAGNUM X-treme Control also has a wooden floor function whereby the temperature is limited to 28°C. This makes the MAGNUM X-treme Control the idea and safe solution for every electric heating system.

Specification:
• Voltage: 230 Volt - 50/60 Hz
• Maximum capacity: 16A - 3600 watt
• Temperature range: +5 to +40°C
• Frame: IP21
• Color: Polar white (RAL 9010)
• Testing: FI/CE

Technical details:
• Control via touch sensitive keys
• Chameleon function (8 colour themes)
• Screensaver night clock
• Automatic start-up menu
• Slow start-up function
• Wooden floor function (28 °C limit)
• Automatic summer and winter times
• Multi-programme function (2 periods per day)
• Programming multilingual
• Including floor and air sensors
• Multi-frame adapter system for: Gira, Jung, Elko, Merten, Busch Jager, etc.