Low profile shower drains
Products available in this category have lowest installation height. Total distance from the very bottom of their waste to the tile level is 64-98 mm depending on drain type. Most of them are available with high-flow rate siphon trap. Linear drains with low profile are especially useful with limited space.
Linear drain Wiper 500 mm Premium Slim Pure WIPERPremium Slim Pure linear drain 500
mm is the lowest profile wet room drainage type we can supply. It's total height including waste trap is only 64 mm. Channel consists of flange and welded vertical frame. Modern design, slim grating and low space requirements are making it suitable and good looking in almost every shower. High capacity, welded siphon trap is integrated with the drainage. A textile sealing membrane is also included, allowing to achieve waterproof seal very easily.
5901797253479 52435
Premium Slim drain channel is 58 mm wide and it has included Pure slot grate which is 38 mm wide. Tileable grate depth is 12 mm, so tiles should not be thicker than 10 mm. After tiling is completed only visible part of the drain is gap between the grate and rest of the floor, which allows water to flow. Total width with insulating flange is 96 mm and total unit length 540 mm.
Stainless steel waste trap is welded below the drainage, is fixed in position with outlet perpendicular to channel. Outlet is 40 mm long and has diameter of 40 mm, comes with adapter which allows you to connect it to 50 mm standard pipes. It is high flow rate siphon trap which can take up to 38 l/min. Water seal of 30 mm stops the smells from getting back into shower. Easy clean system gives access from cleaning from above, after lifting up the grate.
5 / 5 | 4 reviews£ 261.99
£ 209.59 30/04/2019 https://wetroomsdesign.co.uk/low-profile-drain-premium-slim-pure-500mm In Stock
Linear drain Wiper 500 mm Invisible Slim WIPERLinear shower channel Wiper Invisible Slim 500 mm
is stainless steel shower gully without vertical frame, which gives it flexibility to be installed under any finish material. It is most commonly used to be in vinyl, marble, stone, exotic wood or glass floorings. Entire drain including the grating should be covered with your finish material so only channels for water to flow are visible after installation. Invisible Slim is more advanced than Invisible, it has lower installation height and higher capacity. Wet room drains Invisible have included grate 52 mm wide and total width with flange is 92 mm. Cover is 494 mm long and drain 560 mm long in total. It should be covered entirely with floor finish material, best if it's edges could be properly adapted to leave sufficient amount of space for gaps for water to flow. Fabric for cleaning purposes before sticking finish material to cover is included. Stainless steel waste trap is welded below the drainage, is fixed in position with outlet perpendicular to channel. Outlet is 40 mm long and has diameter of 40 mm, comes with adapter which allows you to connect it to 50 mm standard pipes. It is high flow rate siphon trap which can take up to 38 l/min. Water seal of 30 mm stops the smells from getting back into shower. Easy clean system gives access from cleaning from above, after lifting up the grate.
5901797255060 52450
5 / 5 | 1 review£ 241.99
£ 193.59 30/04/2019 https://wetroomsdesign.co.uk/linear-shower-channel-invisible-500mm In Stock
Linear drain Wiper 500 mm Elite Pure WIPERWet room drainage Wiper Elite Pure 500 mm
is the best quality stainless steel gully in our store. It features flange connection drainage which allows water trapped under tiles to be taken out of shower. Grating is also advanced, it has integrated system which allows to set up height from 8 mm up to 50 mm. Floor level Elite drain has low installation height, modern beautiful design and good technical properties makes it a luxury product.
5901797260088 56401
Linear drain Elite is 48 mm wide and it has included Pure slot grate which is 38 mm wide. Tileable grate depth is 12 mm, so tiles should not be thicker than 10 mm. After tiling is completed only visible part of the drain is gap between the grate and rest of the floor, which allows water to flow. Total width with insulating flange is 96 mm and total unit length 540 mm.
Stainless steel waste trap is welded below the drainage, is fixed in position with outlet perpendicular to channel. Outlet is 40 mm long and has diameter of 40 mm, comes with adapter which allows you to connect it to 50 mm standard pipes. It is high flow rate siphon trap which can take up to 38 l/min. Water seal of 30 mm stops the smells from getting back into shower. Easy clean system gives access from cleaning from above, after lifting up the grate.
4.67 / 5 | 3 reviews£ 272.99
£ 218.39 30/04/2019 https://wetroomsdesign.co.uk/wet-room-drain-elite-pure-500mm In Stock
Linear drain Wiper 500 mm Premium Slim Ponente WIPERPremium Slim Ponente linear drain 500
mm is the lowest profile wet room drainage type we can supply. It's total height including waste trap is only 64 mm. Channel consists of flange and welded vertical frame. Modern design, slim grating and low space requirements are making it suitable and good looking in almost every shower. High capacity, welded siphon trap is integrated with the drainage. A textile sealing membrane is also included, allowing to achieve waterproof seal very easily.
5901797248390 52438
Premium Slim drain channel is 58 mm wide and comes with included Ponente grate type. It is plain stainless steel bar without any holes, only channels aside. That's the only visible part after the installation is completed. Frame is 12 mm high so is maximum thickness for finish material plus adhesive. Modern and convenient design with practicality for everyday use item. Total width with insulating flange is 96 mm and total unit length 540 mm.
Stainless steel waste trap is welded below the drainage, is fixed in position with outlet perpendicular to channel. Outlet is 40 mm long and has diameter of 40 mm, comes with adapter which allows you to connect it to 50 mm standard pipes. It is high flow rate siphon trap which can take up to 38 l/min. Water seal of 30 mm stops the smells from getting back into shower. Easy clean system gives access from cleaning from above, after lifting up the grate.
4.5 / 5 | 2 reviews£ 261.99
£ 209.59 30/04/2019 https://wetroomsdesign.co.uk/low-profile-drain-premium-slim-ponente-500mm In Stock
Linear drain Wiper 600 mm Invisible Slim WIPERLinear shower channel Wiper Invisible Slim 600 mm
is stainless steel shower gully without vertical frame, which gives it flexibility to be installed under any finish material. It is most commonly used to be in vinyl, marble, stone, exotic wood or glass floorings. Entire drain including the grating should be covered with your finish material so only channels for water to flow are visible after installation. Invisible Slim is more advanced than Invisible, it has lower installation height and higher capacity. Wet room drains Invisible have included grate 52 mm wide and total width with flange is 92 mm. Cover is 594 mm long and drain 660 mm long in total. It should be covered entirely with floor finish material, best if it's edges could be properly adapted to leave sufficient amount of space for gaps for water to flow. Fabric for cleaning purposes before sticking finish material to cover is included. Sufficient siphon trap Smart Trap made of stainless steel is welded to the drain, fixed position and 40 mm long outlet positioned perpendicular to channel. Waste trap has 30 mm water seal which prevents odours from returning to your wet room. Pipe diameter is 40 mm and we include adapter which allows 50 mm waste pipes to be connected to it. Fast flow rate of 38 l/min makes it suitable for wet room with even big shower heads.
5901797244910 52522
4 / 5 | 1 review£ 256.99
£ 205.59 30/04/2019 https://wetroomsdesign.co.uk/linear-shower-channel-invisible-600mm In Stock
Linear drain Wiper 600 mm Elite Pure WIPERWet room drainage Wiper Elite Pure 600 mm
is the best quality stainless steel gully in our store. It features flange connection drainage which allows water trapped under tiles to be taken out of shower. Grating is also advanced, it has integrated system which allows to set up height from 8 mm up to 50 mm. Floor level Elite drain has low installation height, modern beautiful design and good technical properties makes it a luxury product.
5901797258160 52525
Linear drain Elite is 48 mm wide and it has included Pure slot grate which is 38 mm wide. Tileable grate depth is 12 mm, so tiles should not be thicker than 10 mm. After tiling is completed only visible part of the drain is gap between the grate and rest of the floor, which allows water to flow. Total width with insulating flange is 96 mm and total unit length 640 mm.
Sufficient siphon trap Smart Trap made of stainless steel is welded to the drain, fixed position and 40 mm long outlet positioned perpendicular to channel. Waste trap has 30 mm water seal which prevents odours from returning to your wet room. Pipe diameter is 40 mm and we include adapter which allows 50 mm waste pipes to be connected to it. Fast flow rate of 38 l/min makes it suitable for wet room with even big shower heads.
0 / 5 | 0 reviews£ 286.99
£ 229.59 30/04/2019 https://wetroomsdesign.co.uk/wet-room-drain-elite-pure-600mm In Stock
Linear drain Wiper 500 mm Premium Slim Mistral WIPERPremium Slim Mistral linear drain 500
mm is the lowest profile wet room drainage type we can supply. It's total height including waste trap is only 64 mm. Channel consists of flange and welded vertical frame. Modern design, slim grating and low space requirements are making it suitable and good looking in almost every shower. High capacity, welded siphon trap is integrated with the drainage. A textile sealing membrane is also included, allowing to achieve waterproof seal very easily.
5901797259846 52441
Premium Slim drain channel is 58 mm wide and Mistral grate comes with it. It is patterned with regularly placed circles of various size along the entire part length. The most decorated yet convenient and practical to use will fit to every walk in shower flooring. Total width with insulating flange is 96 mm and total unit length 540 mm.
Stainless steel waste trap is welded below the drainage, is fixed in position with outlet perpendicular to channel. Outlet is 40 mm long and has diameter of 40 mm, comes with adapter which allows you to connect it to 50 mm standard pipes. It is high flow rate siphon trap which can take up to 38 l/min. Water seal of 30 mm stops the smells from getting back into shower. Easy clean system gives access from cleaning from above, after lifting up the grate.
5 / 5 | 1 review£ 261.99
£ 209.59 30/04/2019 https://wetroomsdesign.co.uk/low-profile-drain-premium-slim-mistral-500mm In Stock
Linear drain Wiper 700 mm Invisible Slim WIPERLinear shower channel Wiper Invisible Slim 700 mm
is stainless steel shower gully without vertical frame, which gives it flexibility to be installed under any finish material. It is most commonly used to be in vinyl, marble, stone, exotic wood or glass floorings. Entire drain including the grating should be covered with your finish material so only channels for water to flow are visible after installation. Invisible Slim is more advanced than Invisible, it has lower installation height and higher capacity. Wet room drains Invisible have included grate 52 mm wide and total width with flange is 92 mm. Cover is 694 mm long and drain 760 mm long in total. It should be covered entirely with floor finish material, best if it's edges could be properly adapted to leave sufficient amount of space for gaps for water to flow. Fabric for cleaning purposes before sticking finish material to cover is included. Appropriate Smart Trap high capacity siphon trap is integrated to the gully, centred with pipe stuck in 90 degrees angle. Pipe is 40 mm long and has diameter of 40 mm with included adapter which allows it to be connected to 50 mm waste system pipe. Trap has 30 mm tall water seal which blocks the air from going back to bathroom. It features capacity of 38 l / min and can be installed in wet room with even large shower heads.
5901797244903 52597
0 / 5 | 0 reviews£ 268.99
£ 215.19 30/04/2019 https://wetroomsdesign.co.uk/linear-shower-channel-invisible-700mm In Stock
Linear drain Wiper 700 mm Elite Pure WIPERWet room drainage Wiper Elite Pure 700 mm
is the best quality stainless steel gully in our store. It features flange connection drainage which allows water trapped under tiles to be taken out of shower. Grating is also advanced, it has integrated system which allows to set up height from 8 mm up to 50 mm. Floor level Elite drain has low installation height, modern beautiful design and good technical properties makes it a luxury product.
5901797247355 52600
Linear drain Elite is 48 mm wide and it has included Pure slot grate which is 38 mm wide. Tileable grate depth is 12 mm, so tiles should not be thicker than 10 mm. After tiling is completed only visible part of the drain is gap between the grate and rest of the floor, which allows water to flow. Total width with insulating flange is 96 mm and total unit length 740 mm.
Appropriate Smart Trap high capacity siphon trap is integrated to the gully, centred with pipe stuck in 90 degrees angle. Pipe is 40 mm long and has diameter of 40 mm with included adapter which allows it to be connected to 50 mm waste system pipe. Trap has 30 mm tall water seal which blocks the air from going back to bathroom. It features capacity of 38 l / min and can be installed in wet room with even large shower heads.
0 / 5 | 0 reviews£ 299.99
£ 239.99 30/04/2019 https://wetroomsdesign.co.uk/wet-room-drain-elite-pure-700mm In Stock
Linear drain Wiper 500 mm Premium Slim Sirocco WIPERPremium Slim Sirocco linear drain 500
mm is the lowest profile wet room drainage type we can supply. It's total height including waste trap is only 64 mm. Channel consists of flange and welded vertical frame. Modern design, slim grating and low space requirements are making it suitable and good looking in almost every shower. High capacity, welded siphon trap is integrated with the drainage. A textile sealing membrane is also included, allowing to achieve waterproof seal very easily.
5901797247232 52444
Premium Slim drain channel is 58 mm wide. Frame is 12 mm high so is maximum thickness for finish material plus adhesive. It has Sirocco grate included, which is patterned with two rows of squares parallel to the channel edges. They allows water to flow, look elegant and are very practical at the same time. Total width with insulating flange is 96 mm and total unit length 540 mm.
Stainless steel waste trap is welded below the drainage, is fixed in position with outlet perpendicular to channel. Outlet is 40 mm long and has diameter of 40 mm, comes with adapter which allows you to connect it to 50 mm standard pipes. It is high flow rate siphon trap which can take up to 38 l/min. Water seal of 30 mm stops the smells from getting back into shower. Easy clean system gives access from cleaning from above, after lifting up the grate.
0 / 5 | 0 reviews£ 261.99
£ 209.59 30/04/2019 https://wetroomsdesign.co.uk/low-profile-drain-premium-slim-sirocco-500mm In Stock
Linear drain Wiper 800 mm Invisible Slim WIPERLinear shower channel Wiper Invisible Slim 800 mm
is stainless steel shower gully without vertical frame, which gives it flexibility to be installed under any finish material. It is most commonly used to be in vinyl, marble, stone, exotic wood or glass floorings. Entire drain including the grating should be covered with your finish material so only channels for water to flow are visible after installation. Invisible Slim is more advanced than Invisible, it has lower installation height and higher capacity. Wet room drains Invisible have included grate 52 mm wide and total width with flange is 92 mm. Cover is 794 mm long and drain 860 mm long in total. It should be covered entirely with floor finish material, best if it's edges could be properly adapted to leave sufficient amount of space for gaps for water to flow. Fabric for cleaning purposes before sticking finish material to cover is included. Suitable siphon Smart Trap is fixed to the drain, located centrally and pipe perpendicular to gully length. Outlet is 40 mm long, with diameter of 40 mm and included adapter which allows to connect it to 50 mm pipes. It also features water seal 30 mm tall, hair trap and easy clean system from above, after installation is completed. High flow rate of 38 l / min is twice the capacity required for standard bathroom.
5901797244897 52672
5 / 5 | 1 review£ 282.99
£ 226.39 30/04/2019 https://wetroomsdesign.co.uk/linear-shower-channel-invisible-800mm In Stock
Linear drain Wiper 800 mm Elite Pure WIPERWet room drainage Wiper Elite Pure 800 mm
is the best quality stainless steel gully in our store. It features flange connection drainage which allows water trapped under tiles to be taken out of shower. Grating is also advanced, it has integrated system which allows to set up height from 8 mm up to 50 mm. Floor level Elite drain has low installation height, modern beautiful design and good technical properties makes it a luxury product.
5901797253486 52669
Linear drain Elite is 48 mm wide and it has included Pure slot grate which is 38 mm wide. Tileable grate depth is 12 mm, so tiles should not be thicker than 10 mm. After tiling is completed only visible part of the drain is gap between the grate and rest of the floor, which allows water to flow. Total width with insulating flange is 96 mm and total unit length 840 mm.
Suitable siphon Smart Trap is fixed to the drain, located centrally and pipe perpendicular to gully length. Outlet is 40 mm long, with diameter of 40 mm and included adapter which allows to connect it to 50 mm pipes. It also features water seal 30 mm tall, hair trap and easy clean system from above, after installation is completed. High flow rate of 38 l / min is twice the capacity required for standard bathroom.
4.5 / 5 | 2 reviews£ 314.99
£ 251.99 30/04/2019 https://wetroomsdesign.co.uk/wet-room-drain-elite-pure-800mm In Stock
