Linear Drain Elite: Secondary drainage low profile versatile floor finish linear shower drain with flange and adjustable frame
Wet - Room - Drain - Elite - Pure - 700mm
Linear Drain Elite: Secondary drainage low profile versatile floor finish linear shower drain with flange and adjustable frame
Linear Drain Elite: Secondary drainage low profile versatile floor finish linear shower drain with flange and adjustable frame
Stainless steel shower gully with sealing membrane
Features flange connection drainage which allows water trapped under tiles to be taken out of shower
Product is supplied as complete set. Sealing membrane, detachable adjustable feet and appropriate fitting instructions
Slim drains have welded stainless steel trap with 38 l/min of flow rate
Closer look at the adjustable legs
Integrated system which allows to set up grating height from 8 mm up to 50 mm
Closer look at the drain cover
Drain is not visible at all after the installation, besides the channels for water to flow
Example of finished Wet Room with the linear drain Elite available here
Example of finished Wet Room with the linear drain Elite available here
Example of finished Wet Room with the linear drain Elite available here
Example of finished Wet Room with the linear drain Elite available here
  • -20%
Linear Drain Elite: Secondary drainage low profile versatile floor finish linear shower drain with flange and adjustable frame
Linear drain Wiper 700 mm Elite Slim...
Linear Drain Elite: Secondary drainage low profile versatile floor finish linear shower drain with flange and adjustable frame
Linear Drain Elite: Secondary drainage low profile versatile floor finish linear shower drain with flange and adjustable frame
Stainless steel shower gully with sealing membrane
Features flange connection drainage which allows water trapped under tiles to be taken out of shower
Product is supplied as complete set. Sealing membrane, detachable adjustable feet and appropriate fitting instructions
Slim drains have welded stainless steel trap with 38 l/min of flow rate
Closer look at the adjustable legs
Integrated system which allows to set up grating height from 8 mm up to 50 mm
Closer look at the drain cover
Drain is not visible at all after the installation, besides the channels for water to flow
Example of finished Wet Room with the linear drain Elite available here
Example of finished Wet Room with the linear drain Elite available here
Example of finished Wet Room with the linear drain Elite available here
Example of finished Wet Room with the linear drain Elite available here

Linear drain Wiper 700 mm Elite Slim Pure

Secondary drainage low profile versatile floor finish linear shower drain 70 cm with flange, sealing membrane, waste trap, detachable adjustable feet and cover

2 Reviews

Wet room drainage Wiper Elite Slim Pure 700 mm is the best quality stainless steel gully in our store. It features flange connection drainage which allows water trapped under tiles to be taken out of shower. Grating is also advanced, it has integrated system which allows to set up height from 8 mm up to 50 mm. Floor level Elite Slim drain has low installation height, modern beautiful design and good technical properties makes it a luxury product.

Linear drain Elite Slim is 48 mm wide and it has included Pure slot grate which is 38 mm wide. Tileable grate depth is 12 mm, so tiles should not be thicker than 10 mm. After tiling is completed only visible part of the drain is gap between the grate and rest of the floor, which allows water to flow. Total width with insulating flange is 96 mm and total unit length 740 mm.

Appropriate Smart Trap high capacity siphon trap is integrated to the gully, centred with pipe stuck in 90 degrees angle. Pipe is 40 mm long and has diameter of 40 mm with included adapter which allows it to be connected to 50 mm waste system pipe. Trap has 30 mm tall water seal which blocks the air from going back to bathroom. It features capacity of 38 l / min and can be installed in wet room with even large shower heads.

Product Type
  • Linear Drain Elite Slim

Consider your floor finish type — tiles, micro cement, or vinyl — choose a finish that complements your bathroom style. Evaluate dimensions and features to match your requirements.

Drain Length

Drain is available in 8 standard lengths. Although they have same technical performance, length of the drain should be matched room requirements. For an instance 700 mm Drain length is recommended for 1000 mm wide shower.

Drain Cover
  • Pure (tileable)

There are 3 grating patterns available. Elite Slim is only 48 mm wide. It features Secondary Drainage feature which allows water trapped under the tiles to be drained. Flow rate is the same for all of them. They are interchangeable and can be swapped even after the installation. Drain is equipped with lifting hook which makes cleaning easy.

Waterproofing kit

Waterproofing kit is used to seal shower tray as well as connections between walls and floor. It is recommended for concrete and mandatory for timber flooring. Each kit contains 4kg tanking liquid, 1l primer, 10m sealing tape, 2 corners, 2 pipe collars. One kit covers 3 m² with 2 coats. Waterproofing kit

More
Calculate coverage

Underfloor heating kit

Complete Sunfloor Underfloor heating set, including mat, Wi-Fi thermostat, floor sensor and fitting instructions. Fully suitable with our other products. Advanced thermostat with and iOS/Android app allows to set desired temperature of the floor from distance as well as create schedules.
Complete Sunfloor Underfloor heating set

More
Calculate coverage

Tile Backer boards

Tile backer boards are used to create the perfect substrate to tile onto in wet rooms and bathrooms. Superior to cement boards and plywood, due to its waterproof and thermal insulation properties. Tile backer boards

More
Calculate coverage

Shower screen

The Wiper Verre Shower Screen is one of Wiper's new shower enclosures. It is available in multiple standard sizes making it fit in small and large wet rooms. Black and silver options make it looks minimalistic and modern. Perfect choice for any wet room upgrade. Made of 8 mm toughened clear glass with Active Shield coating, 2000 mm high. Included fittings are made of stainless steel. The Verre Shower Screen from Wiper

More
Choose best size

LES7PU
£310.14 £387.68 -20%
Tax included
To get an extra 5% discount simply increase your cart value to £500.
Add to cart your current selections, and you only need to add £189.86 more to unlock a 5% discount for the entire order.
Amount of product sales 9 Sold during the last 90 days
Amount of product views 5 Views during the last 24 hours
Based on current settings, if you Add to cart current set and then order, you will receive the following items:
Waterproofing kit

Size: not included

Underfloor heating kit

Size: not included

Shower screen

Size: not included

 
  • Length (X): 700 [mm]
  • Total height (H): 64 [mm]
  • Width of channel (Y): 48 [mm]
  • Width of insulating flange (F): 90 [mm] (included)
  • Width of sealing membrane (M): 250 [mm] (included)
  • Flange to top edge of channel (T): 8 - 50 [mm] (adjustable)
  • Complete stainless steel siphon, pipe diameter: 1.5" (British standard size),
  • Drain's cover included.

Pure drain cover is an internal container that you can insert the tiles into. This type of drain is 100% tile-able.

  • Tile channel depth (A): 10 [mm]
  • Tile channel width (D): 31 mm [mm]

Premium Slim technical drawing

Product is suitable for:
Timber floor Concrete floor Tiles Mosaic

Grating patterns available for this product:

Grating - Designs - Elite

Premium - Footer

Channel length
700 mm
Grate style
Pure (slot)
Channel height
18 - 60 mm
Total height
64 mm
Channel width
48 mm
Total width
90 mm
Material
304 S 15 grade stainless steel
Additionals
Tanking kit, Adjustable legs
Drain surface
mirror · brush · matt
Waste trap
Stainless steel
Steel collar
Integrated
Cleaning
From above (Easy clean system)
Model
Elite
Set consists
Linear drain body · stainless steel collar · sealing membrane · drain grating · stainless steel siphon trap
Smart trap
SMART TRAP®
The drain includes a new patented stainless steel siphon with a flow rate of 38 l/min and the Easy Clean system. To clean it you can simply dismantle it from above when installed, and waterflow will remove any dirt. If not you can use chemicals. The waste trap provides Water Seal that prevents any bad smells to get back to your shower.

  • Colour: metal, chrome
  • Material: 304 stainless steel,
  • Cleanable: from above,
  • Smell trap: incorporated,
  • Pipe diameter: 1,5" (british standard pipe size),
  • Diameter of siphon: 105 mm,
  • Total siphon height: 50 mm.


Please note that this siphon makes an integral part of the drain. It cannot be rotated. This solution helped with reducing the total height of the drain and creating a very durable, solid structure.
Tanking kit

The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Should not be used in places exposed to pressurised water, for an instance swimming pools. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.

For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.

Tanking kit contains:
  • 4kg Tanking Liquid
  • 1l Primer
  • 10 Metres flexible Sealing Tape
  • 2 Flexible Pipe Collars
  • 2 Corners
Features:
  • Consumption to 1,2kg/m²
  • Solvent free
  • Drying time: 2h
Tanking liquid and primer
Tanking liquid
Tanking liquid

The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.

The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.

Primer
Waterproofing Calculator

Waterproofing Calculator

Optimize Your Waterproofing with Our Calculator – Accurate, Customizable, and Easy to Use. Get your waterproofing needs sorted with our advanced waterproofing calculator, designed for accuracy and ease of use. Whether you’re waterproofing a bathroom, kitchen, or any other room, our tool allows you to calculate your requirements in three different ways: by room dimensions, simple room coverage, or exact square meter needs. Additionally, you can exclude specific areas like doors and windows, or even calculate for multiple rooms at once. Our calculator provides a tailored list of necessary products, ensuring you get only what you need. Download your estimate as a PDF or add the items directly to your cart for a streamlined ordering experience.

Calculate Needed Waterproofing
Tanking kit

The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Should not be used in places exposed to pressurised water, for an instance swimming pools. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.

For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.

Tanking kit contains:
  • 4kg Tanking Liquid
  • 1l Primer
  • 10 Metres flexible Sealing Tape
  • 2 Flexible Pipe Collars
  • 2 Corners
Features:
  • Consumption to 1,2kg/m²
  • Solvent free
  • Drying time: 2h
Tanking liquid and primer
Tanking liquid
Tanking liquid

The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.

The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.

Primer
Waterproofing Calculator

Waterproofing Calculator

Optimize Your Waterproofing with Our Calculator – Accurate, Customizable, and Easy to Use. Get your waterproofing needs sorted with our advanced waterproofing calculator, designed for accuracy and ease of use. Whether you’re waterproofing a bathroom, kitchen, or any other room, our tool allows you to calculate your requirements in three different ways: by room dimensions, simple room coverage, or exact square meter needs. Additionally, you can exclude specific areas like doors and windows, or even calculate for multiple rooms at once. Our calculator provides a tailored list of necessary products, ensuring you get only what you need. Download your estimate as a PDF or add the items directly to your cart for a streamlined ordering experience.

Calculate Needed Waterproofing
Sealing mat

ISOL-ONE Sealing collar
The ISOL-ONE sealing mat is made from a polyethylene film coated with a special non-woven fabric on both sides, so that it bonds with the glue layer. Its installation is recommended in all areas that require sealing. The mat is resistant to the cracking of the substrate, ensures the seal up of the entire surface, reduces installation time, allowing to lay the tiles immediately after gluing the mat.

Adjustable legs

Adjustable legs
Adjustable feet are two small metal parts that can be connected to each channel end. They allow you to precisely set the unit height and level. Thanks to the red caps you can anchor the drain to the floor. They are part of unit, included in price and always added to each drain.

Linear drains fitting instructions

Please read the instructions carefully before installation.

  1. Set the level of the finished shower floor surface and mark it on the wall in the area where the channel will be fitted (allow for the slope of the shower surface).
  2. Connect the channel to the drainage system and set the height using the adjustable legs (optional additional payment) so that the upper edge of the frame is approximately 1mm below the finished surface level of the shower.
  3. Fill the space under and around the channel with screed or a similar product to the level of the flange.
  4. Cover the flange and the surrounding area with an insulating foil in a liquid form.
  5. Apply the sealing membrane in position on the freshly applied liquid foil.
  6. Apply a second coat of the liquid foil to the whole surface of the shower area and the sealing membrane.
  7. Once the liquid foil is completely dry as per the manufacturer's instructions, the shower can be tiled (eg ceramic tiles or granite). Seal the gap between the tiles and the channel frame with flexible sanitary silicone compatible with the tile and grout colour.
  • The diagram shows various parts of the channel and their dimensions can be found on the More info tab.
  • We recommend that you do not remove the protective foil from the grating until the installation is complete
  • The instructions refer to the correct installation of the channel only and do not include information regarding insulation or other elements of the shower cabin such as sealing connections between the shower walls and floor as well as water proofing.
  • The channel should be installed together with the siphon trap and then the adjustable legs should be glued in the places shown.
Installation step Installation step

Documents available below are available to everybody for free to download. They can be open in high quality on your computer and be printed for further use.

5 Jahre Trusted Badge

Certified Trust and Exceptional Service
Since obtaining our Trustmark on 18 May 2015, wetroomsdesign.co.uk has consistently demonstrated its commitment to being a trustworthy online retailer. Our excellent customer reviews are a testament to our focus on rapid delivery, facilitated by our UK-based warehouse. Stocking thousands of products available for next-day delivery ensures that you receive your purchases promptly. Additionally, our dedicated customer service team is always ready to assist you during and after your order, enhancing your shopping experience. With Trusted Shops Buyer Protection up to £2,500, every purchase is securely backed, ensuring peace of mind with every transaction.

Product Reviews This tab features detailed reviews of the product you are viewing, offering firsthand insights from customers who have experienced its benefits. While the product available on this page may have similar features to other items in our range, each review specifically addresses this particular model, which is available in various sizes to suit diverse needs and preferences. These reviews provide valuable information to help you make an informed decision, highlighting the distinct characteristics and quality of each product uniquely available here.

2 Product reviews for Linear drain Wiper 700 mm Elite Slim Pure

Outstanding
Arrived promptly and very please with this item. I think this one is the best
By Trevor

first-rate
It's got a sleek and beautiful design, easy to clean...can't fault it at all.
By Adrian
Product added to wishlist
×

We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies. For more information, please visit our Privacy Policy.

Close Customise Accept All