is the most popular linear drainage type. Drainage is 900 mm long, which is medium size we can supply. It is made of 304 stainless steel which offers good corrosion resistance to both chemical and atmospheric exposures, with a high resistance to oxidation. It is surrounded by 30 mm wide steel flange and sealing membrane which are very useful especially in timber floors, although drain is also suitable for concrete flooring. This is perfect gully for tiled floors, as the lip height is 15 mm.
Premium drain channel is 84 mm wide, while it comes with included Pure tile able grate, which is 12 mm deep and 64 mm wide, grate is 894 mm long and total drain length with insulation flange is 960mm. Slot drain should be filled with tiles, so at the end of the day only visible part of the drain should be the channel which water flows through. Sealing membrane is a blue non-woven fabric which bonds well in the glue and is resistant to cracking.
Compatible waste siphon trap made by McAlpine is included in second box, can be easily fitted to the drain and to any waste as it comes with pipe, is very flexible and can be adjusted. It can take up to 26 l/min which is slighly more than for average shower (24 l/min). Water seal is 20 mm high, which blocks the smells from returning to bathroom.
Warning: Last items in stock!
Availability date:
Channel
Main drainage part, stainless steel channel drain, 30 mm high, 84 mm wide. Outlet is centred. Surrounded by steel flange on all four sides, 30 mm wide, important for insulation.Included by default.1.2 mm thick steel
Drain grating
Tileable cover is included to this product. It's 12 mm deep and will accept any standard-thickness tiles. To clean the drain, you can lift it up. It's equipped with lifting hook which makes it easier. Included by default.Tileable
Waste trap
Compression fitting McAlpine waste trap with 26 l/min throughput, 20 mm water seal and 1.5'' pipe diameter. Requires only 65 mm of space underneath the tray. Fully rotatable and adjustable. Included by default.Flow rate: 26 l/min
Accessories
Product is supplied as complete set. Adjustable feet are very helpful to position to drain at proper level and are easily removable. Sealing membrane is crucial to make the drain waterproof. Lifting hook for the grating and other fitting parts also in the package. Included by default.For fitting and using
Waterproofing kit
Set of sealing materials. Contains 4kg tanking paint, 1l primer, 10m sealing tape, 2 corners and 2 pipe collars. Handy solution to seal the tray and joints. Can be used to waterproof entire bathroom. Not included by default.Size: not included
Channel length | 900 mm |
Grate style | Pure (slot) |
Channel height | 30 mm |
Total height | 98 mm |
Channel width | 84 mm |
Total width | 140 mm |
Material | 304 S 15 grade stainless steel |
Additionals | Tanking kit, Adjustable legs |
Drain surface | mirror · brush · matt |
Shower waste | Plastic (PCV) |
Steel collar | Integrated |
Cleaning | From above (Easy clean system) |
Model | Premium |
Set consists | Linear drain body · stainless steel collar · sealing membrane · drain grating · siphon trap |
Pure drain cover is an internal container that you can insert the tiles into. This type of drain is 100% tile-able.
Adjustable feet are two small metal parts that can be connected to each channel end. They allow you to set the unit height when installing down the concrete floor. It can be easily removed if necessary for installation in timber floor.
They are part of unit, included in price and always added to each drain.
We supply McAlpine CD-HC26-65 PCV (polypropylen) waste trap with our drains. To clean them you can simply dismantle it from above when installed, and waterflow will remove any dirt. If not you can use chemicals.
The waste trap provides Water Seal that prevents any bad smells to get back to your shower.
The ISOL-ONE sealing mat is made from a polyethylene film coated with a special non-woven fabric on both sides, so that it bonds with the glue layer. Its installation is recommended in all areas that require sealing. The mat is resistant to the cracking of the substrate, ensures the seal up of the entire surface, reduces installation time, allowing to lay the tiles immediately after gluing the mat.
The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas not exposed to pressurised water, such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.
For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.
The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.
The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.
10m sealing tape · 2x flexible pipe collars · 2x corners
Wiper Premium installation
Wiper Premium technical drawing
Siphon technical drawing
Long term guarantee
Dear Jessica,
These drains are simple and most popular solution which is great for a regular wet room. They do not have second drainage - alternative way to have water trapped under the tiles to be drained. We do know about that, this feature is required for drainage to be installed in Scandinavia.
Our other drains - Elite - have that. They have a small gap between the vertical frame and flange surrounding them. They are more expensive though.
I am happy to assist if you have any questions.
Kind regards
Dave
90 premium pure
reasonable price, especially after discount
Copyright © 2019 Wetrooms Design Ltd. All rights reserved.
Companies House 9351345 • VAT GB 226496782 • Cookies & Privacy policy
If you see this it means that our Customer Service Agent is ready to help you. Ask about anything.
Whats your name?
Name: | |
Email: |
This website uses cookies to ensure you get the best shopping experience on our website. Learn more