Linear drain Wiper 1000 mm Elite Sirocco
Wet room drainage Wiper Elite Sirocco 1000 mm
is the best quality stainless steel gully in our store. It features flange connection drainage which allows water trapped under tiles to be taken out of shower. Grating is also advanced, it has integrated system which allows to set up height from 8 mm up to 50 mm. Floor level Elite drain has low installation height, modern beautiful design and good technical properties makes it a luxury product.
Linear drain Elite grating width is 34 mm and frame is 48 mm wide, channel is slim which looks convenient. Frame is 12 mm high so is maximum thickness for finish material plus adhesive. It has Sirocco grate included, which is patterned with two rows of squares parallel to the channel edges. They allows water to flow, look elegant and are very practical at the same time. Total width with insulating flange is 96 mm and total unit length 1040 mm.
Proper Smart Trap siphon comes already fixed to the drain. It is made of stainless steel, welded in the central position, perpendicular to the gully channel. Water seal in waste trap is 30 mm tall and this prevents smells from returning to your wet room. Outlet pipe diameter can be either 40 mm or 50 mm after connecting your pipework to included adapter. Fast flow rate of 38 l/min makes it suitable for almost every wet room shower flooring.
If you buy this product you will receive (parts included):
Channel
1.2 mm thick steel
Drain grating
Sirocco (squares)
Accessories
For fitting and using
Waterproofing kit
Size: not included
| Channel length | 1000 mm |
| Grate style | Sirocco |
| Channel height | 18 - 60 mm |
| Total height | 64 mm |
| Channel width | 48 mm |
| Total width | 90 mm |
| Material | 304 S 15 grade stainless steel |
| Additionals | Tanking kit, Adjustable legs |
| Drain surface | mirror · brush · matt |
| Waste trap | Stainless steel |
| Steel collar | Integrated |
| Cleaning | From above (Easy clean system) |
| Model | Elite |
| Set consists | Linear drain body · stainless steel collar · sealing membrane · drain grating · stainless steel siphon trap |
- Length (X): 1000 [mm]
- Total height (H): 64 [mm]
- Width of channel (Y): 48 [mm]
- Width of insulating flange (F): 90 [mm] (included)
- Width of sealing membrane (M): 250 [mm] (included)
- Flange to top edge of channel (T): 8 - 50 [mm] (adjustable)
- Complete stainless steel siphon, pipe diameter: 1.5" (British standard size),
- Drain's cover included.
Product is suitable for:
Timber floor Concrete floor Tiles MosaicGrating patterns available for this product:
The ISOL-ONE sealing mat is made from a polyethylene film coated with a special non-woven fabric on both sides, so that it bonds with the glue layer. Its installation is recommended in all areas that require sealing. The mat is resistant to the cracking of the substrate, ensures the seal up of the entire surface, reduces installation time, allowing to lay the tiles immediately after gluing the mat.
Adjustable feet are two small metal parts that can be connected to each channel end. They allow you to precisely set the unit height and level. Thanks to the red caps you can anchor the drain to the floor. They are part of unit, included in price and always added to each drain.
The drain includes a new patented SMART TRAP® stainless steel siphon with a capacity of 38 l/min and the Easy Clean system. To clean it you can simply dismantle it from above when installed, and waterflow will remove any dirt. If not you can use chemicals. The waste trap provides Water Seal that prevents any bad smells to get back to your shower.
- Colour: metal, chrome
- Material: 304 stainless steel,
- Cleanable: from above,
- Smell trap: incorporated,
- Pipe diameter: 1,5" (british standard pipe size),
- Diameter of siphon: 105 mm,
- Total siphon height: 50 mm.
Caution. Please read the instructions carefully before installation.
- The diagram shows various parts of the channel and their dimensions can be found on the More info tab.
- We recommend that you do not remove the protective foil from the grating until the installation is complete
- The instructions refer to the correct installation of the channel only and do not include information regarding insulation or other elements of the shower cabin such as sealing connections between the shower walls and floor as well as water proofing.
- The channel should be installed together with the siphon trap and then the adjustable legs should be glued in the places shown.
The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Should not be used in places exposed to pressurised water, for an instance swimming pools. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.
For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.
Tanking kit contains:
- 4kg Tanking Liquid
- 1l Primer
- 10 Metres flexible Sealing Tape
- 2 Flexible Pipe Collars
- 2 Corners
Features:
- Consumption to 1,2kg/m²
- Solvent free
- Drying time: 2h
Tanking liquid
The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.
Primer
The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.
10m sealing tape · 2x flexible pipe collars · 2x corners
Documents available below are available to everybody for free to download. They can be open in high quality on your computer and be printed for further use.
Wiper Premium Slim installation Wiper Premium Slim technical drawingLong term guarantee
Typical questions asked about products:
How long is the delivery?
Is the product easy to fit?
Which options should I choose?
Linear drain Wiper 1000 mm Elite Sirocco
Ratings number: 0
- Show all
- 1 star feedback
- 2 star feedback
- 3 star feedback
- 4 star feedback
- 5 star feedback
- Most helpful
- Newest
- Oldest
- Highest ratings
- Lowest ratings