is the smallest wet room gully. It has included stainless steel flange and sealing membrane, which are very useful where waterproof seal is necessary. It is made of 304 grade stainless steel which gives product seamless solid look and strenght to resist corrosion.
It consits of 100 x 100 mm drain frame and 94 x 94 mm slot grate. It has included Pure drain type, which is tile able one. Channel should be filled with 94 x 94 mm tile, so at the end of the day only gaps between the cover and rest of the floor should be visible. It can be finished with brushed still, which is practical and very easy to maintain, mirror which is very shiny and reflective, or matt surface.
65 mm high McAlpine siphon trap with pipe is also included to drain. It features capacity of 26 l /min and water seal 20 mm high. Trap can be opened from above, even after the installation is completed, after lifting up the grate to allow easy cleaning. Standard 1.5'' pipe is in the same pack, allowing instant connection to your waste system.
Complete siphon, pipe diameter: 1.5" (british standard size),
Pipe height adjustable and rotatable at 360°,
Drain's cover included.
Pure drain cover is an internal container that you can insert the tiles into. This type of drain is 100% tile-able.
Tile channel depth: 12 [mm]
Tile channel size: 95 x 95 [mm]
Product is suitable for:
Timber floorConcrete floorTilesMosaic
Grating patterns available for this product:
You can add the Adjustable legs to your order. If you select this option, you will receive two parts that can be attached to the edges of linear drain and used to adjust total height of the drain with siphon. We will send them in the same package as the drain.
They are not necessary though, and anything can be used to raise the drain. Usually the installator or the plumber decides if they are required or not. Cost: £12.
We supply McAlpine CD-HC26-65 PCV (polypropylen) waste trap with our drains. To clean them you can simply dismantle it from above when installed, and waterflow will remove any dirt. If not you can use chemicals.
The waste trap provides Water Seal that prevents any bad smells to get back to your shower.
Total height: 61,50 mm,
Waste pipe diameter: 1.5" (british standard size)
Water seal: 20mm
Flow rate [l/min]: 26/50 (for a 15mm/120mm liquid column)
Ready to be connected to waste system
Additional info: Waste Grid and Dip Tube removable from top to facilitate easy cleaning. All McAlpine Shower Traps with top access surpass the minimum required flow rate of 24 litres per minute when tested in accordance with clause 5 of BS EN 274-2:2002
Tiled floor surface,
Documents available below are available to everybody for free to download. They can be open in high quality on your computer and be printed for further use.