Showerlay Wiper 900 x 1400 mm Line VF Ponente
Wet room tray 90 x 140 cm with integrated 60 cm stainless steel linear clamping drain for vinyl floors, waste trap and plain steel cover Ponente
See parts included
Check stock live
Amount of products available off-the-shelf. If order is placed before 3pm, it will be shipped same day with free next business day delivery.
Quantity available in stock for next day delivery:
- Thickness: 20 mm pieces x 2
- Thickness: 28 mm pieces x 1
- Thickness: 35 mm pieces x 1 20 mm 28 mm 35 mm
Total available in stock: 4
(This variant: 2)
Showerlay VF 900 x 1400 is a wet room tray for vinyl floor. It comes with an integrated Wiper VF drain with clamping mechanism which allows to secure the edges of the vinyl sheet around the drain. The benefits of this tray are a 100% waterproof seal, prefabricated appropriate slope (1-2%), acoustic and thermal insulation and integrated innovative drain specified for vinyl.
The tray is built on a board made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fiberglass mesh and cement based glue as well as waterproof membrane. It can also be trimmed down if required to fit a specific dimension.
Ponente plain stainless steel drain cover made of brushed stainless steel is included to the tray just as the McAlpine HC26-50 waste trap with 1.5’’ size outlet.
900 x 1400 wet room trays offers similar benefits to its smaller counter part, whilst allowing you to have a wider entrance. It can be used wall to wall in smaller rooms or placed in larger rooms with a large portion of the floor being sloped toward the drain. This gives you the piece of mind that there will not be any standing water on your surrounding floor area after use.
Based on current settings, if you Add to cart current set and then order, you will receive the following items:
Thickness: 20 mm
Size: not included
- Dimensions as described on equivalent technical drawings,
- If needed, the tray can be easily shortened in its length or width, using a handsaw,
- It is best to cut equal bits from each opposite side.
- The drain channel is located centrally, parallel to the shorter edge.
- Designed especially for a range of Wiper VF clamp drains,
- Drain is integrated into the tray during the manufacturing process,
- The Showerlay VF range is based on a 20/28/35 mm XPS foam sheet
- It is reinforced with flexible cementitious glue and reinforced with a fiberglass mesh,
- In addition to that, it is covered with non-woven fabric, resistant to cracking of the substrate, ensuring the waterproofness of the entire tray.
- The Showerlay is a CNC machine cut to give a perfect pre-formed fall from each corner to the drain. The board is much thinner around the drain than on the edges.
- It is lightweight but very strong. Durable enough for a vinyl floor covering installation.
- Perfect solution for British wooden floors but can also be used on concrete floors. When it is used on wooden floors, the floor must be underboarded after floor boards have been removed,
- Standard and minimal underboarding ply should be 18 mm thick in case of installation in timber floor,
- Ideal for a vinyl floor covering. Integrated Wiper VF drain is a clamp type, which features a mechanical locking system, allowing the edges of the vinyl being clamped and protected.
- The tray can be easily trimmed on-site should you have any obstacles such as pipe boxings or uneven walls,
- Compatible with underfloor heating systems, however due to insulation properties, the warming effect will be restricted if the heating is installed under the tray
- Thin underfloor heating can be installed on top of the tray, bearing in mind limited allowance for the total thickness of material installed on top of the tray
- One hundred percent, double waterproofing,
- High acoustic and thermal insulation,
Product is suitable for:
- Channel length
- 600 mm
- Grate style
- Ponente
- Height
- 1400 mm
- Width
- 900 mm
- Thickness
- 20 · 28 · 35 mm
- Trimming
- Both sides: up to 50 mm.
- Material
- XPS foam sheet
- Reinforcement
- Cementous glue & waterproofing membrane fabric
- Fall
- 4-way 2% towards the drain
- Additionals
- Tanking kit
- Drain surface
- brush
- Cleaning
- From above (Easy clean system)
- Model
- Line VF
- Set consists
- Wet room tray · integrated linear drain body · drain grating · siphon trap
- Size
- 900 x 1400 mm
Complete Underfloor Heating Kit
It is possible to include a complete Underfloor Heating Kit to your order. All you need to do is to choose the required size. Additional package, with heating mat, appropriate thermostat, sensor and instructions will be dispatched together with the other goods.
To calculate required mat size you need to get square coverage of the floor and exclude any permanent / fixed fixtures from them. It is also recommended to buy slightly smaller mat than calculated size - you can shape it but cannot cut the cables, therefore too large mat could not be installed.
SUNFLOOR Underfloor HeatingThe SUNFLOOR Electric Heating Mat is a unique type of floor heating mat. The system has been designed to be used on an existing tiled floor or an existing finished floor, so that floor heating can still be installed there. The mat is approximately 4 mm thick and can be included in a layer of adhesive without any demolishing or grinding. The mat fits virtually underneath the surface. This decreases the heating time of the floor, that also makes this system suitable for rooms that are not permanently occupied including bathrooms, studies, playrooms, etc.
Heating matUnderfloor heating mat set consists of all necessary parts for installation. One Thermostat is needed for every 23 m² of heating mat. It is included as optional, to allow ordering mat for custom areas, for example if you need 13 m² of mat total, you should buy 10 m² with one of the thermostats set as include and 3 m² with thermostat not included. In case you require less mat coverage than possible to buy from our product pictures, for example 14.5 m² you should always round low with your purchase and buy 14 m² as the mat is impossible to cut. It can be shaped but not shortened to size.
-
Details:
- 2.5 meter 3-core supply cable
- Fully encased in an aluminium earthed sheath
- Unique blind connection between the heating and the connection cable
- Chrome/Nickel resistance wire
- PTFE (Teflon) insulation
- PVC protective sheath
- 10 -11 watt per meter resistance wire, 230 Volt
- Cable diameter approximately 4 mm
- Complies with current NEN standards for installation in completely wet rooms
Thermostat
The C16Wi-Fi is an intuitive programmable thermostat used to control the electrical floor heating system or water heating system. It will keep home comfortable temp whilst minimizing energy use. Install the app on your smartphone to control the heating system remotely with the WiFi thermostat.
-
Specification:
- Voltage: 230 Volt - 50/60 Hz
- Maximum load: 16A / 3600W
- Temperature range: +5 to +40°C
- IP class: IP21
- Testing: CE
- Cable spec.: ≤ 2,5 mm²
- Standby power: ~ 2W
- Size: 85 x 85 mm
- Integral room sensor and floor sensor
- Colour: white or black
This stylish, colourful and refined digital clock thermostat has been specially designed for electric heating systems. The MAGNUM X-treme Control is supplied with every MAGNUM floor heating set (Mat,Cable and Foil types), including external floor sensor, a built-in air sensor and three different frames that suit most brands of switching equipment. The MAGNUM X-treme Control is simple and intuitive to operate using touch sensitive buttons under the display. The new chameleon function is simple to adapt to the colour of your interior. The stylish screensaver shows the time, temperature and current mode without touching the thermostat. The MAGNUM X-treme Control has a new help function that appears after 10 seconds in the menu with a complete description of the setting in question. The MAGNUM X-treme Control also has a wooden floor function whereby the temperature is limited to 28°C. This makes the MAGNUM X-treme Control the idea and safe solution for every electric heating system.
-
Specification:
- Voltage: 230 Volt - 50/60 Hz
- Maximum capacity: 16A - 3600 watt
- Temperature range: +5 to +40°C
- Frame: IP21
- Color: Polar white (RAL 9010)
- Testing: FI/CE
-
Technical details:
- Control via touch sensitive keys
- Chameleon function (8 colour themes)
- Screensaver night clock
- Automatic start-up menu
- Slow start-up function
- Wooden floor function (28 °C limit)
- Automatic summer and winter times
- Multi-programme function (2 periods per day)
- Programming multilingual
- Including floor and air sensors
- Multi-frame adapter system for: Gira, Jung, Elko, Merten, Busch Jager, etc.
In some situations the digital regulation is not required and so the preference is for a simple on/off operation. Specifically industrial applications where the heating must remain on at all times. Therefore MAGNUM has designed the Standard Control: a simple on/off thermostat with temperature regulation that is clearly easy to operate.
-
Specification:
- Voltage: 230 Volt - 50/60 Hz
- Maximum load: 16A / 230 V
- Temperature range: +5 to +40°C
- Housing: IP21
- Color: Polar white (RAL 9010)
- Testing: CE
-
Technical details:
- On/off thermostat complete with temperature regulation
- Including floor sensor
- Integral room sensor and floor limit sensor
- Multi frame adapter system for: Gira, Jung, Elko, Merten, Busch Jager, etc.
The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Should not be used in places exposed to pressurised water, for an instance swimming pools. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.
For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.
Tanking kit contains:
- 4kg Tanking Liquid
- 1l Primer
- 10 Metres flexible Sealing Tape
- 2 Flexible Pipe Collars
- 2 Corners
- Consumption to 1,2kg/m²
- Solvent free
- Drying time: 2h
Tanking liquid
The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.
The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.
Wet room Kit shower tray installation instructions | Timber floor
This installation guide shows how to install wet room kit shower tray Showerlay Wiper on a wooden floor and how to tile it over.
- Preparation of floor and walls. Gather required materials and tools.
- Establish shower area by lying the shower tray in desired future shower position.
- Floor boards removal to expose the joists and avoid increasing total floor height.
- Support the drain using ply with hole cut the match the channel shape.
- Connect the siphon trap pipe to your waste system.
- Prepare even surface with marine plywood board.
- Fit the wet room kit using fixing adhesive.
- Assembly the drain with siphon trap.
- Fill remaining shower area with tile backer boards.
This installation guide shows steps how to install wet room kit shower tray Showerlay Wiper into a concrete floor how to tile it over.
- Preparation of floor and walls. Gather required materials and tools.
- Establish shower area by lying the shower tray in desired future shower position.
- Grind the concrete to prepare a slot for shower tray.
- Cut a hole for siphon trap and pipework.
- Connect the siphon trap pipe to your waste system.
- Prepare even surface by cleaning and bedding the concrete.
- Fit the wet room kit using fixing adhesive.
- Assembly the drain with siphon trap.
- Fill remaining shower area with tile backer boards.
This is a document from our Resource Centre, which you can find HERE
Certified Trust and Exceptional Service
Since obtaining our Trustmark on 18 May 2015, wetroomsdesign.co.uk has consistently demonstrated its
commitment to being a trustworthy online retailer. Our excellent customer reviews are a testament to
our focus on rapid delivery, facilitated by our UK-based warehouse. Stocking thousands of products
available for next-day delivery ensures that you receive your purchases promptly. Additionally, our
dedicated customer service team is always ready to assist you during and after your order, enhancing
your shopping experience. With Trusted Shops Buyer Protection up to £2,500, every purchase is
securely backed, ensuring peace of mind with every transaction.
Product Reviews This tab features detailed reviews of the product you are viewing, offering firsthand insights from customers who have experienced its benefits. While the product available on this page may have similar features to other items in our range, each review specifically addresses this particular model, which is available in various sizes to suit diverse needs and preferences. These reviews provide valuable information to help you make an informed decision, highlighting the distinct characteristics and quality of each product uniquely available here.
No reviews