The SIEME linear drains are a series of elegant and durable, high-quality drainage systems. They are finished with an elegant frame and stainless steel grate with a width of 70 mm. The drains come in a length of 600 mm. The product can be customized to match individual needs and tastes of the customers.
The Stone drain is a very convenient and elegant solution. The grate is filled with tiles, making it fit neatly into any bathroom interior. The drain is also equipped with a stainless steel flange, useful for installation in the floor with an insulating layer. The set also includes adjustable legs and an insulating cuff.
Warning: Last items in stock!
1 mm thick steel
Flow rate: 26 l/min
For fitting and using
Size: not included
|Channel length||600 mm|
|Grate style||Stone (slot)|
|Channel height||30 mm|
|Total height||100 mm|
|Channel width||70 mm|
|Total width||109 mm|
|Material||304 S 15 grade stainless steel|
|Drain surface||mirror · brush · matt|
|Shower waste||Plastic (PCV)|
|Cleaning||From above (Easy clean system)|
|Set consists||Linear drain body · stainless steel collar · sealing membrane · drain grating · Adjustable legs · siphon trap|
The MATLASTIC mat is made of polyethylene film coated with a special non-woven fabric on both sides, so that it bonds with the glue layer better. Its installation is recommended in all areas that require sealing. The MATLASTIC mat is lightweight, flexible and resistant to decay, it ensures a uniform thickness of the sealing layer, it is resistant to cracking of the substrate, ensures the seal up of the entire surface, reduces installation time, allowing to lay the tiles immediately after gluing the mat.
A tanking kit is used to insulate the surface on which tiles will be laid, in areas exposed to moisture. It is recommended wherever a high degree of water resistance is required and in places with high humidity (eg, showers, bathrooms, toilets, laundries, kitchens, etc.). Waterproofing can be used on any type of substrate: the walls of the gypsum-carton boards (Rigips), plastered walls, walls of concrete blocks, wood-based materials, old ceramic tiles, old stone cladding, etc.
For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.
The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.
The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.
The Matlastic mat is made of polyethylene film coated with a special non-woven fabric on both sides, so that it bonds with the glue layer better. Its installation is recommended in all areas that require sealing. The MATLASTIC mat is lightweight, flexible and resistant to decay, it ensures a uniform thickness of the sealing layer, it is resistant to cracking of the substrate, ensures the seal up of the entire surface, reduces installation time, allowing to lay the tiles immediately after gluing the mat.
Hi. Do you sell the drains on there own without a trap please as we would need 2 drains but only one trap. Thank you
I can confirm that we can supply drains without a trap (we would sell it to you with a normal price, then refund the waste trap price - £20), however we cannot confirm that another supplier's waste will be suitable for our drain and our drain will not work without a proper waste so you need to make sure you will be able to use our unit.
Please contact me and I will help to place the order over the phone.
David 017 0927 3601