PCI Pericret 25kg
is a fast setting, cementitous levelling mortar for mineral substrates on walls, floor and ceilings, to use before finish material. Dedicated for applying on internal and external surfaces, e.g. terraces, balconies and swimming pools. Very easy to apply, plastic and workable after adding some water.
PCI Pericret is very easy to apply. Plastic and workable after adding some water. Thanks to its waterproof and resist to weathering and frost, can be used indoor and outdoor. Wide range of layer thickness (surfaces 3 - 30 mm, break-outs 3 - 50 mm) makes it very versatile levelling mortar.
PCI Pericret 25kg bag, when layer is expected to be 3mm thick, will cover up to 6,4m². Surface can be tiled after approx. 2 hours.
Features and benefits:
- Fast setting, can be tiled or re-plastered after approx. 2 hours.
- Waterproof, resistant to weathering and frost, multi-purpose use indoors and out.
- Plastic and workable when water is added, easy to apply.
- Low shrinkage during the curing phase.
- Very low emission.
Fields of application:
- For indoor and outdoor use.
- For floors, walls and soffits.
- On concrete and masonry.
- On gauged render and render.
- On plasterboards and plaster.
- For use on existing ceramic tiles.
- Base coat and/or levelling coat on masonry before applying rubbedfinished render, scratch render or polymer render.
- To level and repair irregular wall surfaces before tiling.
- To level concrete floors and cement screeds, to produce smooth sloped levelling layers prior to laying floor tiles.
- To fix PCI Pecidur HR foam shower floor elements.
- Layer thickness: surfaces 3 - 30 mm, break-outs 3 - 50 mm.
- Material base
- special cement with additives
- Components
- Single component
- Packaging size
- 25 kg PE-lined heavy duty paper bag stock no. 3680/8
- Shelf life
- min. 6 months when stored in dry conditions, no permanent storage over +30°C
- Consumption
- approx. 1.3 kg/m² and mm layer thickness
- Working temperature
- +5 °C to +25°C (substrate temperature)
- Working time
- approx. 30 - 40 minutes
- Consistency
- powder
- Colour
- Grey
- Minimum layer thickness
- 3 mm
- Maximum layer thickness
- 50 mm
- 3 mm layer thickness coverage
- 6.4 m² / 25 kg bag covers approx.
- 10 mm layer thickness coverage
- 1.9 m² / 25 kg bag covers approx.
- 20 mm layer thickness coverage
- 1.0 m² / 25 kg bag covers approx.
- Gauging water for 25 kg bag
- approx. 4.8 - 5.0 l of water
- Curing time
- can be tiled after approx. 2 hours
Preparation of substrate
The substrate must be clean, structurally sound, open-porous, absorbent, free of dust, damp and able to take loads. Prime very absorbent substrates (e.g. sand-lime brick) with PCI Gisogrund, diluted 1 : 1 with water (undiluted for gypsum based substrates), alternatively with undiluted PCI Gisogrund Rapid. Substrates which are very absorbent and insensitive to water can also be intensively pre-wet. Prime non-absorbent substrates (e.g. ceramic tiles) with PCI Gisogrund 303.
Application procedure
- Pour water in a clean mixing container and add the required quantity of PCI Pericret while mixing with a suitable paddle (e.g. from Collomix) attached to a high-speed electric drill until a lumpfree, plastic consistency is produced.
- Using a finishing trowel, apply a thin scratch coat with PCI Pericret to the clean substrate before applying the mortar to the entire surface.
- PCI Pericret can be applied in one layer to a thickness of 50 mm (for break-outs) and 30 mm (for surfaces).
- When the mortar has initially set (approx. 30 to 90 minutes depending on layer thickness, substrate and working temperature) PCI Pericret can be rubbed down with a damp felt board or sponge float (Moltopren sponge, porous) or smoothed with a finishing trowel or short double plane if necessary.
- The substrate must be prewet and protected against rapid drying in high temperatures, wind and direct sunlight (e.g. repeated sprinkling with water, covering with jute or PE foil).
Please note:
- Never add water or wet PCI Pericret to reconstitute a mortar mix which has already begun to set.
- PCI Pericret is unsuitable when acting as a substrate for reaction resin coatings.
- Suitable tools are available from e.g. Collomix GmbH Horchstraße 2 85080 Gaimersheim/Germany www.collomix.de.
- Clean tools and mixing containers with water immediately after use; when the product has cured it can only be removed by mechanical scraping.
- Shelf life: min. 6 months when stored in dry conditions, no permanent storage over +30°C.
Dear Paul,
This product is available off-the-shelf, so if you order it before 3 o'clock it will be shipped same day with next day delivery.
I am happy to help if you have any other questions.
Kind regards
Matt
020 7193 0953
Hello,
How many of them would you like to buy? Would this ba an order for a single product or do you want to order more of them, a pallet for example?
I think shipping is possible, what's the price and time acceptable for you that's the question.
Kind regards
David 020 7193 0953
Hello,
How many of them would you like to buy? When do you need this shower tray? This is a new product in our store and we do not have it in stock yet, so the delivery of this product takes longer because it is produced only after placing the order. Production and delivery can take up to 25 days.
Please, let us know how many of them you require and we will prepare a delivery quote.
Kind regards
Agnes D.
Customer service
Hello,
We are not working during weekends, sometimes we do reply to emails and phone calls.
You can visit our Rotherham warehouse from Monday to Friday, 9am - 6 pm.
Let me know if you have any questions about our products or service.
Kind regards
Adam 017 0927 3601
Hello,
Yes, tanking liquid is available separately, however it's less cost efficient. Waterproofing kit is available at comparable price and contains materials that you will probably need to use anyway.
There's special category in our store: Tanking liquid.
I am happy to assist if you have any further questions.
Kin regards
David 020 7193 0953
Hi Andrea,
It's too late for us to ship it today, but if you ordered it now we would ship it tomorrow with next day delivery.
Orders placed before 3 o'clock are shipped same day. After 3 o'clock on the next business day.
Kind regards
David 020 7193 0953
Dear Daniel,
Shelf life of the Nanofug Premium is 12 months, therefore as long as it's not been opened it can still be used within several months.
If the bags have been opened they are probably no longer usable and you will need to supply a new product.
I will be happy to assist if you have any questions.
Kind regards
David 020 7193 0953
Dear Tracey,
Sealing membrane should be applied after applying first layer of tanking liquid. It works as a great adhesive to stick sealing membrane. If the first layer is already dry, you can use tile adhesive which also works well.
Everything should be covered with another tanking liquid layer afterwards.
Kind regards
David M 020 7193 0953
Dear Sean,
Joints between the tray and rest of the floor and the walls is the most important part that needs to be sealed off 3 m2˛ of waterproofing kit is enough for that, should also last to cover the tray itself with it as well with 2 coats.
If you wanted to waterproof more space, maybe even entire floor, then you should go for 6 m2˛.
I will be happy to help if you have any questions.
Kind regards
David 020 7193 0953
Dear Ken,
You can place the order before 3 o'clock to have it shipped same day.
The best what we could do is tomorrow before 9 am, but there would be additional £20 delivery fee.
We could also send it for £10 with before noon delivery.
Lastly for free for just tomorrow delivery.
Same applies for packaging of 10l. Please call me to arrange the order.
I will be happy to assist if you have any questions.
Kind regards
David 020 7193 0953