Square gully Wiper WP150 Classic Mistral

Square drain WP150 Classic Mistral

is the largest square shower drain for wet rooms in our shop. It's suitable only for outdoor use and should not be installed in wet areas. It doesn't have stainless steel flange so it would require a lot of work to make it waterproof. It is made of 304 grade stainless steel which gives product seamless solid look and strength to resist corrosion.

It consits of 150 x 150 mm drain frame and 144 x 144 mm grate. Total channel depth is 30 mm, so gives some flexibility when cast into concrete. Mistral top cover has regularly placed differently sized circular holes, which are used for water to flow. Stainless steel is finished with brush, which is very practical and long lasting solution, even after scratching it damage will usually not be visible.

Fitting McAlpine PVC siphon trap comes included to every unit. It's most important propertites is speed it can take water from the floor - 26 l/min, water seal which prevents air from returning to room - 20 mm, total height of 65 mm and installation flexibilty - can be rotated and pipe's height adjusted. Made by McAlpine can be assembled to the drain and to waste system easily.

More details

New product

£ 143.99

Tax included

  • Not include
  • 3 m²
  • 6 m²
Waterproofing kit is used to seal shower tray as well as connections between walls and floor. It is recommended for concrete and mandatory for timber flooring. Each kit contains: 4kg tanking liquid, 1l primer, 10m sealing tape, 2 corners, 2 pipe collars. One kit covers 3 m² with 2 coats. If you buy it as addition to any drain or wet room kit You save £40 if you buy kit that covers 3 m² or £80 if buy one which covers 6 m².

Send to a friend

Send product information

Basic product info and a link to a product will be sent to a person specified above.

Where should we reply to?

We will do our best to reply as fast as possible.
Size150 x 150 mm
Cover size144 x 144 mm
Grate styleMistral
Total height88 mm
Material304 S 15 grade stainless steel
AdditionalsTanking kit, Adjustable legs
Drain surfacemirror · brush · matt
Shower wastePlastic (PCV)
Steel collarNot integrated
CleaningFrom above (Easy clean system)
ModelClassic
Set consistsSquare drain body · drain grating · siphon trap
  • Made of high quality stainless steel
  • Size: 150 x 150 [mm]
  • Total height (H): 88 [mm]
  • Height (G): 68 [mm]
  • Throughput: 26/50 [l/min]
  • Brushed Stainless Steel Finish
  • High quality McAlpine poly propylene siphon trap
  • Complete siphon, pipe diameter: 1.5" (british standard size),
  • Pipe height adjustable and rotatable at 360°,
  • Drain's cover included.

WP150 Classic

Grating patterns available for this product:

Linear shower drain advantages

We supply McAlpine CD-HC26-65 PCV (polypropylen) waste trap with our drains. To clean them you can simply dismantle it from above when installed, and waterflow will remove any dirt. If not you can use chemicals. 

The waste trap provides Water Seal that prevents any bad smells to get back to your shower.

  • Colour: white,
  • Total height: 61,50 mm,
  • Waste pipe diameter: 1.5" (british standard size)
  • Water seal: 20mm
  • Flow rate [l/min]: 26/50 (for a 15mm/120mm liquid column)
  • Ready to be connected to waste system
  • Additional info: Waste Grid and Dip Tube removable from top to facilitate easy cleaning. All McAlpine Shower Traps with top access surpass the minimum required flow rate of 24 litres per minute when tested in accordance with clause 5 of BS EN 274-2:2002

Suitable for:

  • Wet rooms,
  • Showers,
  • Bathrooms,
  • Outdoor drainage,
  • Concrete floors,
  • Screed floors,
  • Tiled floor surface,
  • Wheelchair use,

Documents available below are available to everybody for free to download. They can be open in high quality on your computer and be printed for further use.

 Wiper Classic technical drawingSiphon technical drawing  Long term guarantee

The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas not exposed to pressurised water, such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.

For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.

Tanking kit contains:

  • 4kg Tanking Liquid
  • 1l Primer
  • 10 Metres flexible Sealing Tape
  • 2 Flexible Pipe Collars
  • 2 Corners

Features:

  • Consumption to 1,2kg/m²
  • Solvent free
  • Drying time: 2h

Tanking liquid

Tanking liquidThe tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.

Primer

Tanking primerThe product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.

10m sealing tape · 2x flexible pipe collars · 2x corners

Tanking mattPipe collarCorner

Question will be displayed after moderation.

Typical questions asked about products:
How long is the delivery?
Is the product easy to fit?
Which options should I choose?

Opinions, reviews and tests for:
Square gully Wiper WP150 Classic Mistral
Average grade: 0
Ratings number: 0
5
0%
4
0%
3
0%
2
0%
1
0%
Do you own this product?
Leave product review to help other customers to make the right choice

Customer product reviews