Linear drain Wedi 1000 mm Riolita Optima Tileable
Warning: Last items in stock!
This product is not sold individually. You must select at least 1 quantity for this product.
Wedi Riolita Optima 1000 mm long linear shower drain incorporate a flange all an four sides of the drain body. In one side collar is folded, which facilitates the mounting of the wall and ensures optimum offset grid from the surface of the tile arranged on the wall. The tiles surrounding the drain are glued down onto the flange creating an excellent seal. The channel is complemented by a high quality stainless steel trap. The entire drain is made of 304 S 15 grade stainless steel. 304/304L (UNS S30400) is the most common and widely used stainless steel. It is an austenitic stainless steel with non-magnetic properties in the annealed condition that offers good corrosion resistance to both chemical and atmospheric exposures, with a high resistance to oxidation. Type 304/304L has good forming and excellent welding characteristics. It is non-hardenable by heat treatment. Our channels are supplied with adjustable legs to make installation easier. Also, you can choose grating design between classic stainless steel, modern blue glass, tileable channel or stylish standard grid.
|Channel length||1000 mm|
|Channel height||28 mm|
|Total height||128 mm|
|Channel width||52 mm|
|Total width||121,5 mm|
|Material||304 S 15 grade stainless steel|
|Waste trap||Stainless steel|
|Cleaning||From above (Easy clean system)|
|Set consists||Linear drain body · stainless steel collar · drain grating · adjustable legs · siphon trap|
The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Should not be used in places exposed to pressurised water, for an instance swimming pools. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.
For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.
The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.
The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.
It is possible to include a complete Underfloor Heating Kit to your order. All you need to do is to choose the required size. Additional package, with heating mat, appropriate thermostat, sensor and instructions will be dispatched together with the other goods.
To calculate required mat size you need to get square coverage of the floor and exclude any permanent / fixed fixtures from them. It is also recommended to buy slightly smaller mat than calculated size - you can shape it but cannot cut the cables, therefore too large mat could not be installed.
The MAGNUM Electric Heating Mat is a unique type of floor heating mat. The system has been designed to be used on an existing tiled floor or an existing finished floor, so that floor heating can still be installed there. The mat is approximately 4 mm thick and can be included in a layer of adhesive without any demolishing or grinding. The mat fits virtually underneath the surface. This decreases the heating time of the floor, that also makes this system suitable for rooms that are not permanently occupied including bathrooms, studies, playrooms, etc.
Underfloor heating mat set consists of all necessary parts for installation. One Thermostat is needed for every 23 m² of heating mat. It is included as optional, to allow ordering mat for custom areas, for example if you need 13 m² of mat total, you should buy 10 m² with one of the thermostats set as include and 3 m² with thermostat not included. In case you require less mat coverage than possible to buy from our product pictures, for example 14.5 m² you should always round low with your purchase and buy 14 m² as the mat is impossible to cut. It can be shaped but not shortened to size.
In some situations the digital regulation is not required and so the preference is for a simple on/off operation. Specifically industrial applications where the heating must remain on at all times. Therefore MAGNUM has designed the Standard Control: a simple on/off thermostat with temperature regulation that is clearly easy to operate.
Adjustable legs are included. You will receive two parts that can be attached to the edges of linear drain and used to adjust total height of the drain with siphon. We will send them in the same package as the drain.
They are not necessary though, and anything can be used to raise the drain. Usually the installator or the plumber decides if they are required or not. Included.
Typical questions asked about products:
How long is the delivery?
Is the product easy to fit?
Which options should I choose?