Wetrooms Design Ltd

November 18, 2019
Matt R.
Shower drains
1766 views

When choosing bathroom equipment, you need to pay attention to a lot of variables such as length, depth, throughput, standards met, etc. Particularly much attention should be paid when choosing a shower tray or drain. Our personal requirements and expectations must be confronted with the present bathroom situation, previously applied solutions, e.g. floor construction, and with what the market offers. One of the more important elements of every shower is the waste trap. Therefore, below you will find summary of the siphons we offer with a brief description and the most important parameters. Default siphons offered to each of our shower trays, linear and point drains are in most cases the best choice. However, we are aware of the fact that each bathroom is different and in special situations we give the opportunity to personalize your order.

SYFON H+M DROP 50

Drop50 High water flow rate of up to 48 l / min, which is sufficient for installations with high water loads showers. The height of the siphon itself is less than 8 cm. Thanks to the high waster seal level, it will not let smells out of the sewage system even after long periods of non-use. The number in its name informs us about this parameter, so this siphon has a 50 mm water seal. It was made of polypropylene, which is resistant to cracks, acids and aging. The orientation of the siphon relative to the drain is arbitrary so you can easily adapt it to the drainage system in your bathroom. Additionally, it can be used with our shower trays.

SUITABLE FOR

Linear drain shower trays: all
Square drain shower trays: all, except Ponente
Linear drains: Wiper Premium, Wiper Premium ZK, Wiper Invisible
Square drains: Wiper Premium WP100, 120, 150 (except Ponente)

DIMENSIONS

Height: 78 mm
Width: 120 mm
Length: 180 mm
Flow rate: 48 l/min
Water seal: 50 mm
Waste hole diameter: 50 mm
Connection diameter: 50 mm

H+M DROP 35

Drop 35 A smaller version of the waste trap described above. It has a slightly lower level of water seal, but at the same time it is 1.5 cm lower, which often makes installation in the floor much easier. Besides, it is no different from his bigger brother.

SUITABLE FOR

DIMENSIONS

Height: 63 mm
Width: 120 mm
Length: 180 mm
Flow rate: 48 l/min
Water seal: 35 mm
Waste hole diameter: 50 mm
Connection diameter: 50 mm

H+M SNAKE

Snake Special slim siphon. Thanks to it's unique design, its height has been limited to just 46 mm while maintaining quite high throughput. Used wherever there is no way to dig deeper into the floor. Unfortunately, due to its shape, it cannot be placed along the drain. Can be turned only in a limited range. Cannot be used with shower trays.

SUITABLE FOR

Linear drains: Sieme, Wiper Premium, Wiper Premium ZK, Wiper Invisible

DIMENSIONS

Height: 46 mm
Width: 100 mm
Length: 260 mm
Flow rate: 36 l/min
Water seal:30 mm
Waste hole diameter: 50 mm
Connection diameter: 40 mm

McAlpine HC26

Hc26 Default, universal siphon added to our shower trays, linear and square drains. It offers decent dimensions in relation to the flow rate and the level of water seal. It also fits all offered line and point drains. It has an easy cleaning system. Suits most of cases.

SUITABLE FOR

Linear drain shower trays: all
Square drain shower trays: all
Linear drains: Sieme, Wiper Premium, Wiper Premium ZK, Wiper Invisible
Square drains: Wiper Premium WP100, 120, 150

DIMENSIONS

Height: 68 mm
Width: 80 mm
Flow rate: 26 l/min (or 52 l/min with 120 mm liquid column)
Water seal: 20 mm
Waste hole diameter: 50 mm
Connection diameter: 1,5'' mm

McAlpine STW4-R

Stw4r A higher version of the HC26 siphon with an increased level of water seal. Dedicated rather to traditional shower trays.

SUITABLE FOR

Linear drain shower trays: all
Square drain shower trays: all
Linear drains: Wiper Premium, Wiper Premium ZK, Wiper Invisible
Square drains: Wiper Premium WP100, 120, 150

DIMENSIONS

Height: 123 mm
Width: ~80 mm
Flow rate: 26 l/min (or 52 l/min with 120 mm liquid column)
Water seal: 50 mm
Waste hole diameter: 70 mm
Connection diameter: 1,5'' mm

SMART TRAP STAINLESS STEEL WASTE

Smart Trap Siphon made fully out of stainless steel. Permanently installed in Slim type linear drains. It is an integral part of Premium Slim, Invisible Slim and Elite Slim drains. It cannot be rotated or dismantled. Thanks to this, it was possible to significantly reduce its height while maintaining high flow rate and water seal parameters.

OFFERED WITH ALL SLIM TYPE DRAINS

DIMENSIONS

Height: 50 mm
Width: ~80 mm
Flow rate: 38 l/min
Water seal: 30 mm
Connection diameter: 40 mm

Matt R.

Expertise: Customer Support, Sales, Underfloor Heating, Shower Drainage

About Matt

With years of dedicated service in customer support and a dynamic role in sales, Matt stands out as a knowledgeable and reliable expert, especially in the realms of underfloor heating and shower drainage solutions. His journey through various facets of customer interaction and product introduction has not only honed his skills but also enriched his understanding of client needs and industry trends.

Areas of Specialization

Underfloor Heating: Matt's strongest suit lies in underfloor heating systems. His in-depth knowledge spans various aspects of this field, from installation nuances to maintenance tips.

Shower Drainage: With a confident grasp of shower drainage technologies, including linear shower drains and wet room shower trays, Matt provides valuable insights into modern bathroom solutions.

Blog Contributions

Matt's blog posts are a testament to his extensive experience across three key fields: customer support, sales, and product knowledge. Each article he pens is infused with practical advice, industry knowledge, and a deep understanding of customer perspectives.

See the author's articles

Share this post

Linear drain Wiper 600 mm Premium Pure

WIPER

LP6PU

£230.54 £288.17

6 Reviews

Shower drain Wiper 600 mm Premium Pure is the most popular linear drainage type. 600 mm is the second shortest length, common for most wet rooms. It is made of 304 stainless steel, which offers good corrosion resistance to both chemical and atmospheric exposures, with a high resistance to oxidation. It is surrounded by a 30 mm wide steel flange and...

Wet Room Kit: Tileable Shower Tray, Including Waste Trap And Drain Cover (Pure - Tile Insert)

Wet Room Kit: Tileable Shower Tray, Including Waste Trap And Drain Cover (Pure - Tile Insert) 2

-15%

Wet Room Shower Trays

Showerlay Wiper 800 x 1200 mm Line Pure

WIPER

TLB8125PU

£374.56 £440.66

83 Reviews

Wet room Kit Showerlay Wiper 800 x 1200 mm Line Pure is a walk-in shower tray with end linear drain. It is available in three thicknesses, has 2% fall towards the drain, provides great acoustic insulation, and is also lightweight while very strong.Wet room tray comes with integrated and waterproofed stainless steel linear channel, a suitable McAlpine...

Square Drain Kit: Premium Square Drain With Pure Cover And Waste Trap

Square Drain Kit: Premium Square Drain With Pure Cover And Waste Trap 2

Square Traps

Square gully Wiper WP100 Premium Pure

WIPER

SGP1010PU

£155.06

2 Reviews

Square wet room drain WP100 Premium Pure is the smallest wet room gully. It has included stainless steel flange and sealing membrane, which are very useful where waterproof seal is necessary. It is made of 304 grade stainless steel which gives product seamless solid look and strength to resist corrosion. It consits of 100 x 100 mm drain frame and 80 x 80...