Videos related to Linear drain Wiper 900 mm Premium Ponente
- -20%
Linear drain Wiper 900 mm Premium Ponente
Linear shower drain 90 cm model Ponente for tiled floor with flange, sealing membrane, waste trap, detachable adjustable feet and cover
3 Reviews
See parts included
Check stock live
Amount of products available off-the-shelf. If order is placed before 3pm, it will be shipped same day with free next business day delivery.
Quantity available in stock for next day delivery:
- Linear drain Wiper 900 mm Premium Ponente x 19
Total available in stock: 19
Shower drain Wiper 900 mm Premium Ponente
is the most popular linear drainage type. Drainage is 900 mm long, which is medium size we can supply. It is made of 304 stainless steel which offers good corrosion resistance to both chemical and atmospheric exposures, with a high resistance to oxidation. It is surrounded by 30 mm wide steel flange and sealing membrane which are very useful especially in timber floors, although drain is also suitable for concrete flooring. This is perfect gully for tiled floors, as the lip height is 15 mm.
Premium drain channel is 84 mm wide, while it comes with included Ponente plain stainless steel pattern without any holes, solid bar of brushed steel which is 64 mm wide, grate is 894 mm long and total drain length with insulation flange is 960mm. Sealing membrane is a blue non-woven fabric which bonds well in the glue and is resistant to cracking.
Compatible waste siphon trap made by McAlpine is included in second box, can be easily fitted to the drain and to any waste as it comes with pipe, is very flexible and can be adjusted. It can take up to 26 l/min which is slighly more than for average shower (24 l/min). Water seal is 20 mm high, which blocks the smells from returning to bathroom.
Based on current settings, if you Add to cart current set and then order, you will receive the following items:
![Linear drain channel Linear drain channel](/modules/setconsists/views/img/linear-drain-premium.png)
1.5 mm thick steel
![Underfloor heating kit Underfloor heating kit](/modules/setconsists/views/img/underfloor_heating_not_include.png)
Size: not included
- Length (X): 900 [mm]
- Height of channel (C): 30 [mm]
- Height to the centre of waste pipe (G): 68 [mm] (can be adjusted)
- Total height (H): 98 [mm]
- Width of channel (Y): 84 [mm]
- Width of insulating flange (F): 140 [mm] (included)
- Width of sealing membrane (M): 250 [mm] (included)
- Flange to top edge of channel (T): 15 [mm]
- Complete siphon, pipe diameter: 1.5" (british standard size),
- Pipe height adjustable and rotatable at 360°,
- Drain's cover included.
Product is suitable for:
Timber floor Concrete floor Tiles MosaicGrating patterns available for this product:
- Channel length
- 900 mm
- Grate style
- Ponente
- Channel height
- 30 mm
- Total height
- 98 mm
- Channel width
- 84 mm
- Total width
- 140 mm
- Material
- 304 S 15 grade stainless steel
- Additionals
- Tanking kit, Adjustable legs
- Drain surface
- mirror · brush · matt
- Waste trap
- Plastic (PCV)
- Steel collar
- Integrated
- Cleaning
- From above (Easy clean system)
- Model
- Premium
- Set consists
- Linear drain body · stainless steel collar · sealing membrane · drain grating · siphon trap
![Sunfloor logo](/img/cms/manufacturers/sunfloor_logo.png)
![UFH Mat](/img/cms/sunfloor_desc.png)
Complete Underfloor Heating Kit
It is possible to include a complete Underfloor Heating Kit to your order. All you need to do is to choose the required size. Additional package, with heating mat, appropriate thermostat, sensor and instructions will be dispatched together with the other goods.
To calculate required mat size you need to get square coverage of the floor and exclude any permanent / fixed fixtures from them. It is also recommended to buy slightly smaller mat than calculated size - you can shape it but cannot cut the cables, therefore too large mat could not be installed.
SUNFLOOR Underfloor HeatingThe SUNFLOOR Electric Heating Mat is a unique type of floor heating mat. The system has been designed to be used on an existing tiled floor or an existing finished floor, so that floor heating can still be installed there. The mat is approximately 4 mm thick and can be included in a layer of adhesive without any demolishing or grinding. The mat fits virtually underneath the surface. This decreases the heating time of the floor, that also makes this system suitable for rooms that are not permanently occupied including bathrooms, studies, playrooms, etc.
Heating matUnderfloor heating mat set consists of all necessary parts for installation. One Thermostat is needed for every 23 m² of heating mat. It is included as optional, to allow ordering mat for custom areas, for example if you need 13 m² of mat total, you should buy 10 m² with one of the thermostats set as include and 3 m² with thermostat not included. In case you require less mat coverage than possible to buy from our product pictures, for example 14.5 m² you should always round low with your purchase and buy 14 m² as the mat is impossible to cut. It can be shaped but not shortened to size.
-
Details:
- 2.5 meter 3-core supply cable
- Fully encased in an aluminium earthed sheath
- Unique blind connection between the heating and the connection cable
- Chrome/Nickel resistance wire
- PTFE (Teflon) insulation
- PVC protective sheath
- 10 -11 watt per meter resistance wire, 230 Volt
- Cable diameter approximately 4 mm
- Complies with current NEN standards for installation in completely wet rooms
Thermostat
The C16Wi-Fi is an intuitive programmable thermostat used to control the electrical floor heating system or water heating system. It will keep home comfortable temp whilst minimizing energy use. Install the app on your smartphone to control the heating system remotely with the WiFi thermostat.
-
Specification:
- Voltage: 230 Volt - 50/60 Hz
- Maximum load: 16A / 3600W
- Temperature range: +5 to +40°C
- IP class: IP21
- Testing: CE
- Cable spec.: ≤ 2,5 mm²
- Standby power: ~ 2W
- Size: 85 x 85 mm
- Integral room sensor and floor sensor
- Colour: white or black
![UFH Sunfloor Thermostat](/themes/warehousechild/assets/img/extratabsimg/smart-thermostat.jpg)
![Magnum X-treme control](/themes/warehousechild/assets/img/extratabsimg/x-treme-control-thermostat.jpg)
This stylish, colourful and refined digital clock thermostat has been specially designed for electric heating systems. The MAGNUM X-treme Control is supplied with every MAGNUM floor heating set (Mat,Cable and Foil types), including external floor sensor, a built-in air sensor and three different frames that suit most brands of switching equipment. The MAGNUM X-treme Control is simple and intuitive to operate using touch sensitive buttons under the display. The new chameleon function is simple to adapt to the colour of your interior. The stylish screensaver shows the time, temperature and current mode without touching the thermostat. The MAGNUM X-treme Control has a new help function that appears after 10 seconds in the menu with a complete description of the setting in question. The MAGNUM X-treme Control also has a wooden floor function whereby the temperature is limited to 28°C. This makes the MAGNUM X-treme Control the idea and safe solution for every electric heating system.
-
Specification:
- Voltage: 230 Volt - 50/60 Hz
- Maximum capacity: 16A - 3600 watt
- Temperature range: +5 to +40°C
- Frame: IP21
- Color: Polar white (RAL 9010)
- Testing: FI/CE
-
Technical details:
- Control via touch sensitive keys
- Chameleon function (8 colour themes)
- Screensaver night clock
- Automatic start-up menu
- Slow start-up function
- Wooden floor function (28 °C limit)
- Automatic summer and winter times
- Multi-programme function (2 periods per day)
- Programming multilingual
- Including floor and air sensors
- Multi-frame adapter system for: Gira, Jung, Elko, Merten, Busch Jager, etc.
In some situations the digital regulation is not required and so the preference is for a simple on/off operation. Specifically industrial applications where the heating must remain on at all times. Therefore MAGNUM has designed the Standard Control: a simple on/off thermostat with temperature regulation that is clearly easy to operate.
-
Specification:
- Voltage: 230 Volt - 50/60 Hz
- Maximum load: 16A / 230 V
- Temperature range: +5 to +40°C
- Housing: IP21
- Color: Polar white (RAL 9010)
- Testing: CE
-
Technical details:
- On/off thermostat complete with temperature regulation
- Including floor sensor
- Integral room sensor and floor limit sensor
- Multi frame adapter system for: Gira, Jung, Elko, Merten, Busch Jager, etc.
![Magnum Manual Thermostat](/themes/warehousechild/assets/img/extratabsimg/analog-thermostat.jpg)
![Tanking kit](/themes/warehousechild/assets/img/extratabsimg/wiper-waterproofing-kit1.jpg)
The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Should not be used in places exposed to pressurised water, for an instance swimming pools. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.
For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.
Tanking kit contains:
- 4kg Tanking Liquid
- 1l Primer
- 10 Metres flexible Sealing Tape
- 2 Flexible Pipe Collars
- 2 Corners
- Consumption to 1,2kg/m²
- Solvent free
- Drying time: 2h
![Tanking liquid and primer](/themes/warehousechild/assets/img/extratabsimg/wiper-waterproofing-kit2.jpg)
![Tanking liquid](/themes/warehousechild/assets/img/extratabsimg/tanking-liquid.jpg)
Tanking liquid
The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.
The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.
![Primer](/themes/warehousechild/assets/img/extratabsimg/tanking-primer.jpg)
![Sealing mat](/themes/warehousechild/assets/img/extratabsimg/sealing-membrane-new.jpg)
ISOL-ONE Sealing collar
The ISOL-ONE sealing mat is made from a polyethylene film coated with a special non-woven fabric on both sides, so that it bonds with the glue layer. Its installation is recommended in all areas that require sealing. The mat is resistant to the cracking of the substrate, ensures the seal up of the entire surface, reduces installation time, allowing to lay the tiles immediately after gluing the mat.
![Adjustable legs](/themes/warehousechild/assets/img/extratabsimg/adjustable-legs.jpg)
Adjustable legs
Adjustable feet are two small metal parts that can be connected to each channel end. They allow you to precisely set the unit height and level. Thanks to the red caps you can anchor the drain to the floor. They are part of unit, included in price and always added to each drain.
Linear drains fitting instructions
Please read the instructions carefully before installation.
- Set the level of the finished shower floor surface and mark it on the wall in the area where the channel will be fitted (allow for the slope of the shower surface).
- Connect the channel to the drainage system and set the height using the adjustable legs (optional additional payment) so that the upper edge of the frame is approximately 1mm below the finished surface level of the shower.
- Fill the space under and around the channel with screed or a similar product to the level of the flange.
- Cover the flange and the surrounding area with an insulating foil in a liquid form.
- Apply the sealing membrane in position on the freshly applied liquid foil.
- Apply a second coat of the liquid foil to the whole surface of the shower area and the sealing membrane.
- Once the liquid foil is completely dry as per the manufacturer's instructions, the shower can be tiled (eg ceramic tiles or granite). Seal the gap between the tiles and the channel frame with flexible sanitary silicone compatible with the tile and grout colour.
- The diagram shows various parts of the channel and their dimensions can be found on the More info tab.
- We recommend that you do not remove the protective foil from the grating until the installation is complete
- The instructions refer to the correct installation of the channel only and do not include information regarding insulation or other elements of the shower cabin such as sealing connections between the shower walls and floor as well as water proofing.
- The channel should be installed together with the siphon trap and then the adjustable legs should be glued in the places shown.
![Installation step Installation step](/themes/warehousechild/assets/img/installation-step2.jpg)
![Installation step Installation step](/themes/warehousechild/assets/img/installation-step5.jpg)
Documents available below are available to everybody for free to download. They can be open in high quality on your computer and be printed for further use.
![5 Jahre Trusted Badge](/modules/iqitreviews/views/img/trustedshops-certified.png)
Certified Trust and Exceptional Service
Since obtaining our Trustmark on 18 May 2015, wetroomsdesign.co.uk has consistently demonstrated its
commitment to being a trustworthy online retailer. Our excellent customer reviews are a testament to
our focus on rapid delivery, facilitated by our UK-based warehouse. Stocking thousands of products
available for next-day delivery ensures that you receive your purchases promptly. Additionally, our
dedicated customer service team is always ready to assist you during and after your order, enhancing
your shopping experience. With Trusted Shops Buyer Protection up to £2,500, every purchase is
securely backed, ensuring peace of mind with every transaction.
Product Reviews This tab features detailed reviews of the product you are viewing, offering firsthand insights from customers who have experienced its benefits. While the product available on this page may have similar features to other items in our range, each review specifically addresses this particular model, which is available in various sizes to suit diverse needs and preferences. These reviews provide valuable information to help you make an informed decision, highlighting the distinct characteristics and quality of each product uniquely available here.
complete unit
Everything price included: legs, sealing membrane, grate and of course drain channel. This is the first company provide such a great solution.
worth choosing
great addition to a luxury bathroom
premium 900mm ponente
nice but easy to scratch surface, watch out during installation, better put the grating aside