Warning: Last items in stock!
|Size||600 x 1200 mm|
|Board coverage||0.72 m²|
|Compressive Strength||300 kN/m2|
|Resistance to soft body Impact load||3 x 120 Nm|
|Working Temperature Range||-50 to +75 c|
|Fire behaviour||Class E|
|Pack quantity||1 piece|
|Pack coverage||0.72 m²|
Imperboard is made from a high-performance waterproof extruded polystyrene, coated with a glass fiber mesh and polymer cement mortar.
Cement coated building board - Used for creating a waterproof surface suitable for fixing wall and floor tiles.
|Density||DIN 53420||36 kg/m3|
|Thermal Conductivity||EN 13164||0.034 Watt/mK|
|Compressive Strength||DIN 5342||300 kN/m2|
|Water Absorption (Immersion)||ISO 2896||<0.2%|
|Water Vapour (Permeability)||EN 12086||2.5m (20mm Board)|
|EU Controlled Substances Content||N/a||None|
|Bond Strength||NS-EN 1607||0.55 N/mm2|
|Resistance to soft body Impact load||ETAG 003||3 x 120 Nm|
|Bending moment capacity - 12mm||NS-EN 12089||181 Nmm/mm|
|Bending moment capacity - 20mm||NS-EN 12089||340 Nmm/mm|
|Bending Stiffness - 12mm||NS-EN 12089||134 kNmm2/mm|
|Bending Stiffness - 20mm||NS-EN 12089||399 kNmm2/mm|
|Fire behaviour||13501-1:2007+A1:2009||Class E|
|EU controlled substances content||N/a||None|
|Working Temperature Range||N/a||-50 to +75 c|
For use in conjunction with fixing screws when securing Imperboard to walls and floors.
For fixing Imperboard to masonry walls or tiled surfaces. Ideal for use in wet areas. Use 9 Dowels per sqm of board.
|Stainless Steel||Coverage||Box Quantity|
|Stainless Steel||50 m²||100|
|Stainless Steel||90 m²||100|
|Stainless Steel||110 m²||100|
Sharp point, zinc plated drywall screws used with washers for mechanically fixing Imperboard to walls and floors.
|Stainless Steel||Length X||Box Quantity|
Hi, is 20mm tile backer board suitable to lay directly onto floor joists to replace the old chipboard & then tile on top of? Is it strong enough for that? Cheers, LJ.
No. Tile backer board cannot replace floor boards.
- remove existing floor boards
- fix battens to the sides of the joints
- mount at least 18 mm thick marine ply in between the joists on top of the battens
- cover newly created floor with tile backer boards and proceed to tiling
I am happy to assist if you have any questions.