2 - M - Tilepal - Tile - Backer - Boards - 10mm - Thick - Including - 36 - Washers - And - 36 - Screws
2 - M - Tilepal - Tile - Backer - Boards - 10mm - Thick - Including - 36 - Washers - And - 36 - Screws
2 M² Tilepal Tile Backer Boards 10mm. . .
2 m² Tilepal Tile Backer Boards 10mm...

2 m² Tilepal Tile Backer Boards 10mm thick, including 36 washers and 36 screws

Stable, impervious 120 cm x 60 cm tile backer boards for wet areas, including screws and washers

Tilepal See parts included Technical specification

For the convenience of our clients, we have created tile backer board sets. The sets can cover up to 2 m², 4 m², 6 m² or 8 m² and include appropriate amount of washers and mounting screws. You can also choose boards thickness between 6 mm, 10 mm or 20 mm. Tile backer boards creates the perfect substrate to tile onto in wet rooms and bathrooms. Tilepal boards are made out of extruded polystyrene rigid foam and reinforced with glass fiber on both sides and coated with a elastic cement mortar.

Set size

Boards total coverage and their thickness. 6 mm is the minimum thickness needed for the floors, but thicker panels are also fine. 12 or 20 mm thick boards are better for the walls. The extra thickness is needed to span the studs and provide a solid base for the tile.

Amount Of Product Sales 1 Sold during the last 90 days
Amount Of Product Views 2 Views during the last 24 hours

Cement boards are lightweight and strong at the same time. They also have excellent insulating properties, so they work perfectly with an electric underfloor heating. Boards are 1200 x 600 mm and can be cut easily. They create perfect surface for tile adhesives on floors and walls.

This set includes:

  • 3 cement boards (10 mm thick) to cover 2 m²
  • 36 zinc washers
  • 36 drywall screws 
10 mm
Pack coverage
2 m²
No reviews
What are your office opening hours ?Are you open on an Saturday please ?


We are not working during weekends, sometimes we do reply to emails and phone calls.

You can visit our Rotherham warehouse from Monday to Friday, 9am - 6 pm.

Let me know if you have any questions about our products or service.

Kind regards

Adam 017 0927 3601

can i fix Imperboard direct to a timber stud wall [ without ply shearthing ] and if so what centres are the studs best set at? thanks j

Dear Customer,

Yes you can fix to a timber stud wall. You can use 10 or 12mm: 10mm - 300mm centres, 12mm - 400mm centres.

I am happy to assist if you have any questions.

Kind regards

I have bought and installed your Showerlay Wiper 800 x 1500 Line Pure shower tray and am about to tile it. we want to use mosaic tiles which are just 6mm thick. After tanking and adhesive the tiles are likely to be about 4 mm below the level of the ...

Dear Lawrence,

I understand your concern. Please notice that while having the future floor level under the frame's height is not acceptable, having tiles sitting slightly above the frame is fine. Ideal situation is where tiles are sitting flushed with the frame.

There are 2 solutions:

- using multiple layer of tile adhesive. After first layer is dry you can apply another to build up height which will allow your mosaic tiles to be flushed with the drain's frame.

- using tile backer boards. You'd need to get 6 mm thick tile backer boards, cut them according to the slopes on the tray and fit them prior to finishing it with mosaic.

In both case the most important thing to do is not jeopardizing the slopes on top of the tray. There are diagonal slopes from every corner of the tray to every corner of the drain.

I am happy to assist if you have any further questions.

Kind regards

This looks great, I'm looking to have a 1200 x 2300mm walk in shower with a 1200 returning screen. This would be perfect (I think) I don't know what height I need though the intent was to use a 18 or 22 mm structural backing board and wanted this to ...

Dear Tom,

Thank you for being interested in our products. 1200 x 1200 would be fine shower tray for 1200 x 2300 mm wet room enclosed by a shower screen.

According to our fitting instructions, we recommend to remove floor boards, fix battens to the joints and mount at least 18 mm thick marine plywood in between the joints so the ply and joints are on the same level. Then you can fit the tray on top of that prepared supports.

In such case your tray just replace the floor board. If you want to use 18 mm thick backer boards on the remaining floor area I would recommend to go for 35 mm thick tray.

Kind regards

David M 020 7193 0953

Hi, is 20mm tile backer board suitable to lay directly onto floor joists to replace the old chipboard & then tile on top of? Is it strong enough for that? Cheers, LJ.

Dear LJ,

No. Tile backer board cannot replace floor boards.

You should:

- remove existing floor boards

- fix battens to the sides of the joints

- mount at least 18 mm thick marine ply in between the joists on top of the battens

- cover newly created floor with tile backer boards and proceed to tiling

I am happy to assist if you have any questions.

Kind regards

How do I secure this to a screed floor, can I use tile adhesive? Can I secure this direct to a brick wall?

Dear Jo,

Thank you for being interested in our products.

Tile backer boards can be stuck down to the floor with tile adhesive, however you need to use washers and screws to fix them to the walls.

I will be happy to assist if you have any questions.

David 020 7193 0953

Hi, is this product suitable to use as insulation boards for underfloor heating when the floor is then going to be tiled? Does it need to be laid on top of plywood (what thickness is recommended?) or can it go straight on the joists ?


Yes, those boards are based on material which provides good insulation, can be used as boards for UFH.

They need to be laid on marine ply, are not strong enough to be installed without underboarding. You can install marine ply in between the joists (on the battens) though to avoid total floor height increase.

I will be happy to assist if you have any questions.

Kind regards

David 020 7193 0953

Which side do you tile on your 12mm tile backer board? Can it be used either side?

Hello Andy,

Thank you for your question.

Tilepal/Imperboard tile backer boards available in our offer at the moment are finished the same way on both sides, therefore it can be tiled over on either side.

I will be happy to help if you have any questions.

Kind regards

David 0113 543 1748

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.

We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies. For more information, please visit our Privacy Policy.

Close Customise Accept All