Videos related to Showerlay Wiper 800 x 800 mm Line Pure
- -15%
Showerlay Wiper 800 x 800 mm Line Pure
Wet room tray 80 x 80 cm for tiled floor with integrated stainless steel linear end drain, waste trap and cover model Pure
11 Reviews
See parts included
Check stock live
Amount of products available off-the-shelf. If order is placed before 3pm, it will be shipped same day with free next business day delivery.
Quantity available in stock for next day delivery:
- Thickness: 20 mm pieces x 27
- Thickness: 28 mm pieces x 7
- Thickness: 35 mm pieces x 4 20 mm 28 mm 35 mm
Total available in stock: 38
(This variant: 27)
Wet room Kit Showerlay Wiper 800 x 800 mm Line Pure is a walk in shower tray with end linear drain. Former is available in three thicknesses, has 2% fall towards the drain, provides great acoustic insulation and is also lightweight while very strong.
Former comes with integrated and waterproofed stainless steel linear channel, suitable McAlpine siphon trap with 26 l/min capacity and grate. Pure is a slot cover, should be filled with tiles so after the installation only visible part of the tray would be the channel. Drainage is 500 mm long and 80 mm wide while grating width is 64 mm. It protrudes above the shower tray by 15 mm and below by approximately 5 mm. Steel is finished with a brush, which is practical and particularly suitable for most architectural applications.
Preformed 800 x 800 mm board is the smallest square shaped tray we offer. It allows you to create an elegant shower, even in a small bathroom. It will not only look beautiful but will offer easy, step-free access.
Based on current settings, if you Add to cart current set and then order, you will receive the following items:
![Linear wet room tray Linear wet room tray](/modules/setconsists/views/img/linear_wet-room_tray_77.png)
Thickness: 20 mm
![Underfloor heating kit Underfloor heating kit](/modules/setconsists/views/img/underfloor_heating_not_include.png)
Size: not included
- Dimensions as described on equivalent technical drawings,
- If needed, the tray can be easily shortened in its length or width, using a handsaw,
- Make sure you cut it for equal distances from both sides to preserve pre-made fall to the drain,
- Drain channel is located centrally, across the shorter edge.
- Designed especially for range of Wiper Premium drains,
- Drain is built into the tray during the manufacturing process,
- Our showerlay is a 20/28/35 mm XPS foam sheet covered on both sides with a flexible cementous glue and reinforced with a fibre glass mesh,
- The showerlay is CNC machine cut to give a perfect pre-formed fall from each corner to the drain,
- It is lightweight but very strong,
- Perfect solution for British wooden floors but can also be used on concrete floors. When it is used on wooden floors,the floor must be underboarded after floor boards have been removed,
- Standard and minimal underboarding should be 20 mm thick,
- Ideal for tiled floors. Because of the high compressive strength of the XPS foam, it can even be used with small mosaic tiles. This is not suitable for vinyl floor coverings,
- The Showerlay can be easily cut on site should you have any obstacles such as pipe boxings,
- Easy to use with under floor heating systems (should be installed on top of the shower tray)
- One hundred per cent, double waterproofing,
- Hardness of the surface layer allows to cement even very small mosaics,
- High acoustic and thermal insulation,
- After installation, the plates should be supported over the entire surface.
Product is suitable for:
Timber floor Concrete floor Tiles Mosaic- Channel length
- 500 mm
- Grate style
- Pure (slot)
- Height
- 800 mm
- Width
- 800 mm
- Thickness
- 20 · 30 · 40 mm
- Trimming
- Both sides: up to 50 mm.
- Material
- XPS foam sheet
- Reinforcement
- Fibre glass mesh & cementous glue.
- Fall
- 4-way 2% towards the drain
- Additionals
- Tanking kit
- Drain surface
- brush
- Cleaning
- From above (Easy clean system)
- Model
- Line
- Set consists
- Wet room tray · integrated linear drain body · drain grating · siphon trap
- Size
- 800 x 800 mm
5901797276478
![Sunfloor logo](/img/cms/manufacturers/sunfloor_logo.png)
![UFH Mat](/img/cms/sunfloor_desc.png)
Complete Underfloor Heating Kit
It is possible to include a complete Underfloor Heating Kit to your order. All you need to do is to choose the required size. Additional package, with heating mat, appropriate thermostat, sensor and instructions will be dispatched together with the other goods.
To calculate required mat size you need to get square coverage of the floor and exclude any permanent / fixed fixtures from them. It is also recommended to buy slightly smaller mat than calculated size - you can shape it but cannot cut the cables, therefore too large mat could not be installed.
SUNFLOOR Underfloor HeatingThe SUNFLOOR Electric Heating Mat is a unique type of floor heating mat. The system has been designed to be used on an existing tiled floor or an existing finished floor, so that floor heating can still be installed there. The mat is approximately 4 mm thick and can be included in a layer of adhesive without any demolishing or grinding. The mat fits virtually underneath the surface. This decreases the heating time of the floor, that also makes this system suitable for rooms that are not permanently occupied including bathrooms, studies, playrooms, etc.
Heating matUnderfloor heating mat set consists of all necessary parts for installation. One Thermostat is needed for every 23 m² of heating mat. It is included as optional, to allow ordering mat for custom areas, for example if you need 13 m² of mat total, you should buy 10 m² with one of the thermostats set as include and 3 m² with thermostat not included. In case you require less mat coverage than possible to buy from our product pictures, for example 14.5 m² you should always round low with your purchase and buy 14 m² as the mat is impossible to cut. It can be shaped but not shortened to size.
-
Details:
- 2.5 meter 3-core supply cable
- Fully encased in an aluminium earthed sheath
- Unique blind connection between the heating and the connection cable
- Chrome/Nickel resistance wire
- PTFE (Teflon) insulation
- PVC protective sheath
- 10 -11 watt per meter resistance wire, 230 Volt
- Cable diameter approximately 4 mm
- Complies with current NEN standards for installation in completely wet rooms
Thermostat
The C16Wi-Fi is an intuitive programmable thermostat used to control the electrical floor heating system or water heating system. It will keep home comfortable temp whilst minimizing energy use. Install the app on your smartphone to control the heating system remotely with the WiFi thermostat.
-
Specification:
- Voltage: 230 Volt - 50/60 Hz
- Maximum load: 16A / 3600W
- Temperature range: +5 to +40°C
- IP class: IP21
- Testing: CE
- Cable spec.: ≤ 2,5 mm²
- Standby power: ~ 2W
- Size: 85 x 85 mm
- Integral room sensor and floor sensor
- Colour: white or black
![UFH Sunfloor Thermostat](/themes/warehousechild/assets/img/extratabsimg/smart-thermostat.jpg)
![Magnum X-treme control](/themes/warehousechild/assets/img/extratabsimg/x-treme-control-thermostat.jpg)
This stylish, colourful and refined digital clock thermostat has been specially designed for electric heating systems. The MAGNUM X-treme Control is supplied with every MAGNUM floor heating set (Mat,Cable and Foil types), including external floor sensor, a built-in air sensor and three different frames that suit most brands of switching equipment. The MAGNUM X-treme Control is simple and intuitive to operate using touch sensitive buttons under the display. The new chameleon function is simple to adapt to the colour of your interior. The stylish screensaver shows the time, temperature and current mode without touching the thermostat. The MAGNUM X-treme Control has a new help function that appears after 10 seconds in the menu with a complete description of the setting in question. The MAGNUM X-treme Control also has a wooden floor function whereby the temperature is limited to 28°C. This makes the MAGNUM X-treme Control the idea and safe solution for every electric heating system.
-
Specification:
- Voltage: 230 Volt - 50/60 Hz
- Maximum capacity: 16A - 3600 watt
- Temperature range: +5 to +40°C
- Frame: IP21
- Color: Polar white (RAL 9010)
- Testing: FI/CE
-
Technical details:
- Control via touch sensitive keys
- Chameleon function (8 colour themes)
- Screensaver night clock
- Automatic start-up menu
- Slow start-up function
- Wooden floor function (28 °C limit)
- Automatic summer and winter times
- Multi-programme function (2 periods per day)
- Programming multilingual
- Including floor and air sensors
- Multi-frame adapter system for: Gira, Jung, Elko, Merten, Busch Jager, etc.
In some situations the digital regulation is not required and so the preference is for a simple on/off operation. Specifically industrial applications where the heating must remain on at all times. Therefore MAGNUM has designed the Standard Control: a simple on/off thermostat with temperature regulation that is clearly easy to operate.
-
Specification:
- Voltage: 230 Volt - 50/60 Hz
- Maximum load: 16A / 230 V
- Temperature range: +5 to +40°C
- Housing: IP21
- Color: Polar white (RAL 9010)
- Testing: CE
-
Technical details:
- On/off thermostat complete with temperature regulation
- Including floor sensor
- Integral room sensor and floor limit sensor
- Multi frame adapter system for: Gira, Jung, Elko, Merten, Busch Jager, etc.
![Magnum Manual Thermostat](/themes/warehousechild/assets/img/extratabsimg/analog-thermostat.jpg)
![Tanking kit](/themes/warehousechild/assets/img/extratabsimg/wiper-waterproofing-kit1.jpg)
The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Should not be used in places exposed to pressurised water, for an instance swimming pools. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.
For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.
Tanking kit contains:
- 4kg Tanking Liquid
- 1l Primer
- 10 Metres flexible Sealing Tape
- 2 Flexible Pipe Collars
- 2 Corners
- Consumption to 1,2kg/m²
- Solvent free
- Drying time: 2h
![Tanking liquid and primer](/themes/warehousechild/assets/img/extratabsimg/wiper-waterproofing-kit2.jpg)
![Tanking liquid](/themes/warehousechild/assets/img/extratabsimg/tanking-liquid.jpg)
Tanking liquid
The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.
The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.
![Primer](/themes/warehousechild/assets/img/extratabsimg/tanking-primer.jpg)
Our wet room kits are available in three thicknesses: 20, 28 and 35 mm. Depending on space, floor type, and desired gradient you can choose best option for you.
If you have timber floor - existing floor board thickness. Usually they are 20 or 28 mm thick, in that case you should go for adequate thick wet room kit, to avoid floor height increase and step ups. If you want to achieve stepped up floor, 35 mm thickness might also be a good choice. If case of concrete floor, every thickness is suitable, if you're going to screed the floor you need to shutter the future shower area off and leave proper space for tray to be inserted in the future. If screed has already been done, you will need to use jackhammer or similar tool to groove exact tray thickness and shape when the shower is going to be created. In case of both floor types, every shower tray thickness is enough to bear human weight, as it needs to be underboarded beneath entire surface either with ply or solid concrete. The biggest difference between thicknesses is the slope's angle achieved after installation is completed and shower tray tiled.
Dimensions:
A - 800 [mm]
B - 800 [mm]
L - 500 [mm]
W - 83 [mm]
C1 - 150 [mm]
C2 - 192 [mm]
D1 - 150 [mm]
D2 - 400 [mm]
Documents available below are available to everybody for free to download. They can be open in high quality on your computer and be printed for further use.
Wet room Kit shower tray installation instructions | Timber floor
This installation guide shows how to install wet room kit shower tray Showerlay Wiper on a wooden floor and how to tile it over.
- Preparation of floor and walls. Gather required materials and tools.
- Establish shower area by lying the shower tray in desired future shower position.
- Floor boards removal to expose the joists and avoid increasing total floor height.
- Support the drain using ply with hole cut the match the channel shape.
- Connect the siphon trap pipe to your waste system.
- Prepare even surface with marine plywood board.
- Fit the wet room kit using fixing adhesive.
- Assembly the drain with siphon trap.
- Fill remaining shower area with tile backer boards.
![Wet Room Installation](https://wetroomsdesign.co.uk/img/cms/instructions/wet-room-tray-fitting-in-timber-floor-step8_compressed.png)
This installation guide shows steps how to install wet room kit shower tray Showerlay Wiper into a concrete floor how to tile it over.
- Preparation of floor and walls. Gather required materials and tools.
- Establish shower area by lying the shower tray in desired future shower position.
- Grind the concrete to prepare a slot for shower tray.
- Cut a hole for siphon trap and pipework.
- Connect the siphon trap pipe to your waste system.
- Prepare even surface by cleaning and bedding the concrete.
- Fit the wet room kit using fixing adhesive.
- Assembly the drain with siphon trap.
- Fill remaining shower area with tile backer boards.
![Wet Room Installation](https://wetroomsdesign.co.uk/img/cms/instructions/wet-room-tray-fitting-in-concrete-floor-step6_compressed.png)
This is a document from our Resource Centre, which you can find HERE
Integrated drain
Shower trays incorporate linear drain built-into the tray during the manufacturing process. Wiper Premium range linear shower drains are made from one piece of 304 grade stainless steel. Only the ends are welded. This means that the flange and drain body are made from the same piece of steel ensuring complete security from water penetration. Our flange is on all four sides of the drain. You will not find a better linear drain on the market.
![Premium drain Premium drain](/themes/warehousechild/assets/img/extratabsimg/premium_drain.jpg)
![Premium drain tech drawing Premium drain tech drawing](/themes/warehousechild/assets/img/extratabsimg/linear_premium_for_showerlay.png)
- Length (X): 500 [mm]
- Width of channel (Y): 84 [mm]
- Height of channel: 30 [mm]
- Height to the centre of waste pipe: 68 [mm] (can be adjusted)
- Total height: 98 [mm]
- Width of insulating flange: 140 [mm] (included)
- Flange to top edge of channel: 15 [mm]
- High quality Mcalpine poly propylene syphon trap included
- Easy clean system (cleanable from above)
- Complete siphon, waste pipe diamter british standard size
- Pipe height adjustable and rotatable at 360°
- Drain's cover is included, please select desired design
- Pure drain cover is an internal container that you can insert the tiles into. This type of drain is 100% tile-able.
- Tile channel depth: 12 [mm]
- Tile channel width: 60 mm [mm]
![5 Jahre Trusted Badge](/modules/iqitreviews/views/img/trustedshops-certified.png)
Certified Trust and Exceptional Service
Since obtaining our Trustmark on 18 May 2015, wetroomsdesign.co.uk has consistently demonstrated its
commitment to being a trustworthy online retailer. Our excellent customer reviews are a testament to
our focus on rapid delivery, facilitated by our UK-based warehouse. Stocking thousands of products
available for next-day delivery ensures that you receive your purchases promptly. Additionally, our
dedicated customer service team is always ready to assist you during and after your order, enhancing
your shopping experience. With Trusted Shops Buyer Protection up to £2,500, every purchase is
securely backed, ensuring peace of mind with every transaction.
Product Reviews This tab features detailed reviews of the product you are viewing, offering firsthand insights from customers who have experienced its benefits. While the product available on this page may have similar features to other items in our range, each review specifically addresses this particular model, which is available in various sizes to suit diverse needs and preferences. These reviews provide valuable information to help you make an informed decision, highlighting the distinct characteristics and quality of each product uniquely available here.
800 x 800
Brilliant product. Very straight forward and very easy to install. Would certainly recommend!!
Good product, replaces a cheaper tray.
Good product replaces a cheaper tray.
Lovely design and a joy to use
Lovely design and a joy to use. We love it. Great to use and just what we wanted.
All ok
Used the shower trays many times before. Great product.
very good
very good product
xps
I have had installed like ten of those. The only concern that I have is how long the foam will keep its hardness and shape.
Compact
Not to spacious but will fit in any enclosure. Installation is easy peasy
No doubts
it's simply good
My wetroom is done
It looks great when finished. I really appreciate changing the grating for me for the tileable one so fast.
just ok
nothing superior to be honest for that price.
so far so good
Installed ensuite for my client. Delivery and product quality bang on. Only gave 4 stars as yet to be tested.