Stone Cach model stand out its frames on the front and side. Surface is made with appropriate slope allowing correct water flow to the drain.
Manufactured from resin, mineral load and aget coat cover.. Highest levels of ergonomy, anti-slippery and anti-discoloration surface, durability and ease of use. Completely filled to dampen the sound of falling water and further increase their resilience to external factors. An extremely thin surface of only 30 mm makes shower trays an extremely viable product for the elderly and disabled.
Highly customizable as they are available in a multitude of different colors, shapes, textures, sizes, and in both framed and frameless versions.
Warning: Last items in stock!
|Size||900 x 1500 mm|
|Material||Resins, mineral load, aget coat cover|
Manufacturing is done with a coloured paste chosen from our colour chart. Therefore, we can manufacture the product in any colour of the RAL chart, a diferent price will be applied. Products manufactured in a special colour out of our standard colour chart cannot be returned.
You can choose smooth or slate finishing.
Our shower trays are covered by GEL COAT which provides:
• No water absorption.
• 45 Barcol hardness.
• High scratch resistance.
• High temperature resistance.
• Chemical agents.
• Customizable according to customer needs.
Its width is approximately 3 cm.
The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas not exposed to pressurised water, such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.
For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use singlecomponent, solvent-free sealant composed of polymer dispersion, fillers and modifying additives. When applied to the surface, upon binding it creates a flexible and water-insulating layer.
The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of polymer dispersion, fillers and additives. When applied to a substrate and cured, it forms a flexible waterproofing coating. The product is intended for use inside places intended for human residence, especially in humid areas (such as bathrooms, kitchens, laundries), to perform insulation against moisture under linings and coverings, such as ceramic tiles, glazed tiles, terracotta, wooden floors and panels, and synthetic carpets.
The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of mold and bacteria in the product.