is a special stainless steel shower floor drain. Water channel is surrounded by steel flange with one side bended vertically. Upstand flange helps with installation directly against the wall. It helps with proper waterproofing and maintaining right distance between tile surface and drain grate. It comes in different lengths which starts at 500 mm and goes all the way till 1200 mm every 100 mm. Although custom size is possible. It is made of 304 stainless steel which offers good corrosion resistance to both chemical and atmospheric exposures, with a high resistance to oxidation. Flange surrounding the channel is 30 mm wide which in combination with sealing membrane (included) ensures good watertightness.
Wall Upstand drain channel is 84 mm wide and it comes with included Mistral stainless steel grate. Mistral pattern features a regularly placed circles of various size along the entire grate, which is 64 mm wide and 1194 mm long and total drain length with insulation flange is 1260 mm. Sealing membrane is a blue non-woven fabric which bonds well in the glue and is resistant to cracking.
We also include 65 mm high McAlpine siphon trap with 95° Multifit connector. It features capacity of 26 l /min, 20 mm high water seal and Easy Access cleaning from above after lifting up the drain grating.
Warning: Last items in stock!
|Channel length||1200 mm|
|Channel height||30 mm|
|Channel width||84 mm|
|Material||304 S 15 grade stainless steel|
|Waste trap||Plastic (PCV)|
|Cleaning||From above (Easy clean system)|
Adjustable feet are two small metal parts that can be connected to each channel end. They allow you to precisely set the unit height and level. Thanks to the red caps you can anchor the drain to the floor. They are part of unit, included in price and always added to each drain.
We supply McAlpine CD-HC26-65 PCV (polypropylen) waste trap with our drains. To clean them you can simply dismantle it from above when installed, and waterflow will remove any dirt. If not you can use chemicals.
The waste trap provides Water Seal that prevents any bad smells to get back to your shower.
The ISOL-ONE sealing mat is made from a
The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas not exposed to pressurised water, such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Ready to use, no mixing required and easy to apply with a roller. The kit includes a
For anti-moisture insulation systems in wet rooms and rooms intended for human residence. The tanking liquid is a ready-to-use
The tanking liquid is a ready to use, single component, solvent-free sealant mass, consisting of
The product is intended for priming absorbent and porous surfaces, inside and outside buildings. It is especially recommended for cement - limestone plaster, gas concrete, plaster-carton boards and cement plaster. The primer has a high penetration ability, is deeply absorbed into the substrate, thus strengthening it, while allowing for „breathing”. These benefits improve the structure of the substrates, which, due to the passage of time, have lost their appropriate parameters. The priming solution improves adhesion to the surface of other materials that will be used on the primed substrate. By reducing the absorbency of the substrate, the wear of the applied coating materials, emulsion paints, glues, mineral putties reduces as well. The solution, due to the content of the biocide and fungicide, protects the primed substrate against the formation of
Typical questions asked about products:
How long is the delivery?
Is the product easy to fit?
Which options should I choose?